Polaroid PDC 1075 manual Turning the Camera On and Off, Checking the Battery Level

3.Place the camera into Docking Station and power on the camera. For further detail please refers to Using Docking Station on page 7.

4.The battery begins charging and the Status LED blinks.

5.It takes up to 2 to 3 hours to fully charge the battery each time.

6.When the Status LED stops blinking, it indicates the Li-polymer rechargeable battery is fully charged.

Please fully charge the battery for up to 10 hours before you use the camera for the first time after purchase. The internal battery should last for the life of the camera, but as is the case with all rechargeable batteries the actual charge held may decline with use. Should it ever become necessary to replace the internal battery, please visit www.polaroid-digital.com/support/ for service instructions.

• Turning the Camera On and Off

Fully press and hold the Power button until the status LED turns green and the camera is on. Press and hold the Power button again, the camera will be off.

• Checking the Battery Level

Check the battery power level before taking pictures.

1.Turn the camera on.

2.Check the power level status that appears on the camera LCD screen.

Battery has adequate power.

Only half of the battery power left.

Battery needs to be recharged.

Power button Status LED

8	Polaroid PhotoMAX PDC 1075 Digital Camera User Guide
	www.polaroid-digital.com

PDC 1075 US UM BF.indd8

4/30/03, 4:20 PM