2.Use the Brightness and Contrast menu functions to reduce the distortion if applicable.
3.If you discover that the image is blurry or out of focus, adjust the focus ring on the camera head.
There is no computer signal on presentation screen.
1.Check all the cable connections among the display device, AVerVision300i and your PC.
2.Connect your PC to the AVerVision300i first before you power on your computer.
The presentation screen does not show the exact desktop image on my PC or Notebook after I toggle from Doc Cam mode to PC mode.
1.Return to your PC or Notebook, place the mouse on the desktop and right click, choose “Properties”, choose “Setting” tab, click on “2” monitor and check the box “Extend my Windows desktop onto this monitor”. Then go back one more time to your PC or Notebook and place the mouse on the desktop and right click again. This time choose “Graphics Options”, then “Output To”, then “Intel® Dual Display Clone”, and then choose “Monitor + Notebook”. After you follow these steps, you should be able to see the same desktop image on your PC or Notebook as well as on the presentation screen.
How do I download images from AVerVision300i to PC ? Is it normal that AVerVision300i will reset to camera mode after I download images and disconnect the USB cable?
1.Choose "IMG Download" from the Menu, and then connect the USB cable to download the captured and stored images from the AVerVision300i to your PC. When finished, unplug the USB cable. The AVerVision300i will automatically reset at camera mode.
28