BenQ DC 3400 User’s Manual
Setting the EV Bias (Exposure)
Set the EV bias to increase or decrease the camera lens’ exposure value. This allows more or less light to pass through the lens. Adjusting this setting in particularly bright or dark environments can improve the quality of the photograph. A higher EV bias value results in a brighter photograph.
1.Press 
and 
to select the EV Bias 
menu.
2.Press 
or the SET Set button.
3.Press 
and 
to change the EV bias value (from
4.Press the Menu MENU or Set SET button to confirm your selection
Setting Light Metering
The DC 3400 has three
Center Average: The camera adjusts itself based on the average light measurement over the center region of the LCD.
Point: The camera adjusts itself based on a point light measurement at the center of the LCD.
Average: The camera adjusts itself based on the average light measurement over the entire region of the LCD.
1.Press 
and 
to select the light metering menu.
2.Press 
and 
to select the meter setting.
3.Press the Menu MENU button to exit the menu or use 
and 
to move on to the next setting.
Setting the Date Imprint
You can choose to have the current date imprinted over your photos. This function can be turned off.
Date Imprint ON
1.Press 
and 
to select the date imprint menu.
2.Press 
and 
to select the date imprint setting.
Date Imprint OFF
3.Press the Menu MENU button to exit the menu or use 
and 
to confirm move on to the next set- ting.
See page 17 for information on setting the camera’s date.
10