Polaroid Spectra AF manual Repeated spots or Cause Solution Bar pattern

Page 25

Guide to better pictures 17

Repeated spots or	Cause	Solution
bar pattern

•Developer rollers inside the ﬁlm door need to be cleaned.

•Open ﬁlm door in indirect light (do not remove ﬁlm). While turning rollers, clean them with a lint-free cloth dampened with water.

Damaged picture

Cause

Solution

•Picture was shaken back and forth or bent shortly after it ejected from the camera.

•Picture was left in the exit slot, and camera was set down on a table or other surface.

•During ﬁrst 60 seconds of development, handle print gently; hold it only by its wide white border, and do not wave or bend it.

•Remove print from exit slot as soon as it ejects.

Image 25

Contents E C T R a a F Page Page Page Page Page Page Safeguards Contents Sends out sound waves Focusing from 2 feetTo measure the distance To your subjectCamera IndoorsYour subject should be within the 2 to 15 foot 0.6m You can take the most pleasing pictures of people, bothTo 4.6m ﬂash range. For best results, your subject should Also be near a light-colored backgroundUsing the camera 6Features Features Recharge indicator To 4.6m from the camera Indoors Your subject should be 2 to 15 feet 0.6mOutdoorsYour subject should be at least 2 feet 6m awayNormal position Self-timer Features Guide to better pictures Eyeglass tissuesGuide to better pictures Keep the sales slip or other proof of the purchase date Blurry picture Cause Repeated spots or Cause Solution Bar pattern Keep the picture con Atures below 55F 13C Pictures taken at temperCan have a blue tint TintYou can take the most pleasing pictures of people Camera, ﬁlm speciﬁcations Guide to better pictures OPN7249A 11/94 English/Español