Asante Technologies 8001 manual Cpu, Ram, Tcp/Ip, Dhcp, Ftp, Samba, Smtp, Led, Emi

SecureNet NetCamNetworkSeries Camera

MPEG4/MJPEG

SPECIFICATIONS

Camera Specification
Sensor type	Color 1/3” CCD Sensor
Scan Method	Interlace
Minimum Illumination	0.2 Lux @ F 2.0
S/N ration	More than 48dB
Gamma Characteristic	0.45
Lens	f3.6° F2.0 Board Lens, full glasses
Pan range	-135°~ 135°(Max120°/sec.)
Tilt range	-45°~ 90° (Max120°/sec.)
Preset numbers	16
Auto white balance	Yes
Auto gain control	Yes
Backlight Compensation	Yes
Video
Video compression	MPEG4 / JPEG (dual codec), H.263 (for 3GPP)
Video frame rate	up to 30fps for all video resolutions
Compression rate selection	5 levels: best, better, normal, faster, fastest
Frame rate setting	NTSC: 1,2,3,4,5,6,7,10,15,30 fps ; PAL: 1, 2,3,4,5,6,12,25 fps
Video resolution	NTSC:176x112, 320x240, 640x480, 704x480
	PAL:176x144, 352x288, 640x480, 704x576
Image rotation	Mirror / Up side down
Digital zoom	Yes, x 1/2, x1, x 2, x 4 times
Motion detection	Yes (3 windows)
Audio
Internal Microphone	Sensitivity: 62 dB
Communication
LAN port	RJ-45, 10/100M auto-sensed, auto crossover
Communication protocol	HTTP, RTSP, FTP, SMTP, TCP/IP, UDP, ARP, ICMP, DHCP, PPPoE, DDNS, UPnP, SAMBA, 3GPP
Video Streaming	Multicasting / RTSP / Over HTTP
System
CPU	32bit RISC CPU
RAM	32MB
Flash ROM	4M Byte
OS	uCLinux
I/O
Alarm Input	2
Alarm output	1
Analog video output	1
Analog audio output	1
Software
Browser	Internet Explorer 6.0 or above
Application Software	CentaView application software
OS supported	Microsoft Windows 2000, XP
Software Features
1. System	Name
	LED Control: ON/OFF/FLASH
2. TCP/IP	Static IP Address
	- IP Address
	- Subnet Mask
	- Default Gateway
	Dynamic IP Address
	- DHCP
	- PPPoE
	--User ID
	--User Password
	Primary DNS Address
	Secondary DNS Address
	Dynamic DNS
	UPnP
	IP Filter
3. Users	Three levels
	Administrator / Operator / Viewer

*

4. Date/ Time Setting	Date: Year/Month/Day
	Time: Hour/Minute/Second
	NTP Protocol
	NTP Server Address
	Time Zone
5. Video
Compressing Rate	5 levels: best, better, normal, faster, fastest
Frame Rate	NTSC: 1,2,3,4,5,6,7,10,15,30 fps ; PAL: 1, 2,3,4,5,6,12,25 fps
Video Resolution	NTSC:176x112, 320x240, 640x480, 704x480
	PAL:176x144, 352x288, 640x480, 704x576
Brightness Control	Yes
Contrast Control	Yes
6. Upload configuration	FTP
	SAMBA
	SMTP
7. Dynamic DNS	Service
	User Name
	Password
	Domain Name
8. Motion Detection
	Motion Sensitivity is adjustable
	Motion mask can be set easily
9. Events	Video loss
	Reboot
	Motion detection
	Alarm-in
	Schedule
10. Triggered Actions	Send video e-mail
	Upload video file to ftp server
	Save video file to network share
	Send notification to TCP/HTTP server
	Control camera to a preset location
	Turn on alarm output
11. P/T Control	-135°~-135°(Max -120°/sec.)
	-45°~90°(Max -120°/sec.)
	Pan / Tilt control
	Supports 16 location Preset / Recall control
	Supports 5 Camera Touring
	Auto Pan
12.Open API	CGI commands to control camera
	Media SDK to handle streaming
13. Other	Reset to factory default setting
Power
Power	DC 12V 1.5A, switching type power supply
Power consumption	10W (800 mA x 12 V), maximum
LED
Link LED	Green color
Alert LED	Green color
Size
Main body	128mm(L) x 116mm(W) x 108mm(H)
Operating environment
Operating temperature	5°C ~ 40°C
Storage temperature	-20°C~ ~ 50°C~
Humidity	10% ~ 80% non-condensing
EMI
	FCC / CE class B

ORDERING INFORMATION

Model Name	Description
NetCam 8001	Standard Network Camera with Ethernet Interace
NetCam 8001P	Network Camera with Power Over Ethernet Interface
NetCam 8001W	Network Camera with Ethernet and Wireless Interface

A Communication Division of UIC Corporation

47709 Fremont Blvd, Fremont, CA 94538 USA · Phone 408.435.8388 · Website www.asante.com

© 2008 Asante - a Division of UIC Corporation. All rights reserved. Asante and	FriendlyNET are trademarks of UICUSA.
All other names may be trademarks or registered trademarks of their respective owners.	Specifications subject to change without prior notice.