2. Using your camera
2.1 Charging battery
Your camera uses a Lithium battery. The USB port serves as a charger for the battery. To charge the battery, simply connect the device via the USB cable to your PC. If the battery power is low, the LCD display will flicker and the device will power off. Should this occur, download your photos to your PC as soon as possible, and then charge the device. Charging time is around six hours.
WARNING:
·Before taking photos, please test the device’s functioning in order to avoid disappointing results. Should the device fail to work, please contact us immediately.
·Static Electricity may effect your device by powering it off. To restart, simply power on again.
2.2Sleep mode (automatic powersaving mode)
If your camera is not connected to the computer and you are not using the camera longer than 30 seconds, the camera will automatically turn off to extend battery life. A Blank LCD screen indicates the camera is in sleep mode.
2