Operation, Cleaning the Eyepiece, Storage and Care

OPERATION

•Take the monocular out of the case.

•Install the batteries into the housing with the polarity order as shown on the scope. Battery type: 3 Volt Lithium, #CR123A

•Press the button marked -/O to turn unit on with the protective lens cover still attached to the lens. Do not turn unit on in the daytime without the protective lens cap on. You should see a green glow in the eyepiece.

•Observe the scene and adjust the diopter for the optimal image clarity.

•You may now enter a dark environment or simply shut the lights off in order to darken the room.

•Next, remove the lens cap/daylight filter. Adjust the front lens for distance focus. You should not have to readjust the diopter.

•The unit will turn on and off automatically when you bring it to or take away from your eye. This is done by activating the proximity sensor. To activate the proximity sensor push the digital control marked “A”. You will notice the green LED change to red when the sensor is on.

•In order to assure the proper functioning of the proximity sensor, make sure that the protec- tive glass surface of the sensor is always clean.

•To increase battery life the LED diodes will go off after 10 seconds.

•You will need to focus the objective lens for different distances.

•The handle on the MO-4 swivels easily from left to right allowing comfort of use for both right- ies and lefties. To move the handle loosen the front lens and the eyepiece. The handle then will be adjustable for left- or right-hand use.

•Take your time learning about your “smart” scope. It will take practice to properly use the device. As you use this scope you will be able to improve your speed of focusing, as well as sharpness of image.

•Have fun and enjoy.

CLEANING THE EYEPIECE

You may need to clean the eyepiece of the MO-4 from time to time in order to guarantee top performance. When you receive your MO-4 you should check for dust on the eyepiece of the unit.

First you will need to remove the eyepiece. To remove the eyepiece you will need to initially loosen 2 set screws that can be found on the base. Then unscrew the eyepiece counter-clockwise to remove it.

NOTE: You do not have to remove the set screws completely, they are very small and easy to misplace.

CAUTION: Use only Photographic lens cleaning tissue on these surfaces. Be careful not to scratch, or smudge any of these surfaces. When using compressed air to blow dust away, make sure to avoid inverting the can while spraying. This may cause frozen propellent to exit the can, which can result in serious damage problems of the glass and phosphor screen.

STORAGE AND CARE

•If the device is not to be used for an extended period of time (more than 10 days) remove the battery.

•Avoid touching lenses. If Fingerprints or traces of dirt or dust appear clean surface with a Photographic lens cleaning tissue.

•Keep the lens cap/daylight filter on when not in use.

•The MO-4 is not harmful to the user or the environment.

MO-4 specifications

The ATN MO-4 is an advanced night vision monocular designed for outdoor enthusiasts, hunters, and tactical users who require high-performance optical technology for low-light situations. As part of ATN’s cutting-edge line of optical equipment, the MO-4 stands out with its superior features and innovative technologies.

One of the key attributes of the ATN MO-4 is its impressive image resolution. The device is equipped with high-definition glass optics that deliver sharp and clear images, even in near-total darkness. This ensures that users can identify targets and navigate their environment with confidence. The MO-4's multi-coated lenses further enhance light transmission and minimize glare, making it ideal for use at dusk and dawn, as well as during nighttime operations.

The MO-4 incorporates ATN's proprietary Smart Mode technology, which enhances user experience by automatically adjusting brightness levels based on ambient light conditions. This feature enables seamless transitions between varying light environments, ensuring optimal visibility without manual adjustments. Additionally, the MO-4 is designed to operate efficiently with a long battery life, allowing users to rely on the device throughout extended excursions.

With a robust ergonomic design, the ATN MO-4 provides a comfortable grip for prolonged use. It is lightweight and compact, making it easy to carry and maneuver. The device is also rugged and weatherproof, capable of withstanding harsh environmental conditions, which is essential for outdoor activities.

The MO-4 is equipped with a digital display that provides real-time information, including battery status and operational modes, enhancing overall operational awareness. Moreover, the device supports video recording capabilities, allowing users to capture their experiences seamlessly. With built-in Wi-Fi and Bluetooth, the MO-4 can connect to mobile devices for easy sharing and extended functionality.

Complementing its user-friendly features, the MO-4 is also designed with a range of accessories, including mounting options, allowing for versatility in applications such as hunting, wildlife observation, or tactical operations.

In summary, the ATN MO-4 night vision monocular is a state-of-the-art optical tool that combines advanced technologies, robust design, and user-friendly features. With its high image quality, intelligent operational capabilities, and compact form factor, it stands as an indispensable instrument for anyone needing reliable performance in low-light conditions.