NOTE: If you do not hear the "beep" and/or the frame counter does not count down 1 frame, the photo has not yet been taken. Press Shutter button again to take the picture.
Tip:
It is recommended that you take a few trial shots at different distances to see the results of each photo.
Changing Capture Modes
Continuous Mode
1.Press Mode button until 
is shown on the LCD panel
2.Hold down the Shutter button to take photos continuously until the frame counter counts down to 00.
NOTE: In Continuous mode, 6 photos will be taken in one second.
Self-Timer
1.Press Mode button until 
appears on the LCD panel
2.Press Shutter button. A beep will sound and the LED will blink for 10 seconds before a photo is taken.
Deleting Photos
Deleting All Photos
1. Press Mode button until 
is shown in the LCD panel.
2. | Press Shutter button and | will flash in the LCD panel. While | is flashing, press Shutter | |
| button again. You will hear two beeps and all photos will be cleared. |
| ||
| NOTE: If Shutter button is not pressed while | is flashing, the frame counter will appear in the | ||
| LCD panel in 5 seconds. |
|
|
|
Deleting Last Photo Taken |
|
|
| |
1. | Press Mode button until | is shown on the LCD panel |
| |
2.Press Shutter button and the last taken photo will be deleted and the frame counter will change in the following pattern:
When camera is in High Resolution mode:
•Erasing the last 1,2 or 3 photos of low resolution will toggle frame counter unchanged.
•Erasing the last 4 photos of low resolution will toggle frame counter to go up by 1
•Erasing the last photo of high resolution will toggle frame counter to go up by 1
When camera is in low resolution mode:
•Erasing the last photo of high resolution will toggle frame counter to go up by 4
•Erasing the last photo of low resolution will toggle frame counter to go up by 1
6