Windows Installation of PC300 Camera and PC300 Driver
1. Installing PC Camera and PC Camera driver
Before installing Camera to your computer, make sure Windows starts up. Then follow the steps below:
1.Plug PC camera's connector to the USB port on your computer. (See Figure 2)
2.Check to make sure you have the correct orientation while plugging the USB connector into the USB port of your computer.
3. Once Windows has detected new hardware | Figure 2 |
added to the system, an USB Device |
|
message appears on the screen, asking you |
|
to search a new device. |
|
4.Click “ Next ” to continue.
5.In the next dialog box, you will be asked to select a method to search for the driver for your PC Camera. Choose “Search for a suitable driver for my device (Recommended).”
6.Insert PC Camera Installation CD into your
Note: Close
7.Click “Next” to continue.
8.The next screen shows the default path for the camera driver, depending on the existing operating system on your PC. For example:
Letter D indicates the location of your CD ROM drive.
Click “Browser” to select driver location
5