Argus Camera DC1540 manual Self-Timer Mode

Page 6

Self-Timer Mode:

1.Press the mode button to Self-Timer Mode.

2.Press the shutter button. The camera will take a picture automatically after 10 seconds.

Continuous Mode:

1.Press the mode button to Continuous Mode

2.Then press the shutter button to confirm the setting.

3.Press the shutter button. The camera will take approximately 10 pictures per second in a continuous sequence.

Image resolution Mode:

1.Press the mode button to Low Image Resolution Mode.

2.Press the shutter button to take pictures. The camera is set to take and

store 200 pictures in this mode.

NOTE : If “Low” Mode does not appear on the LCD screen, the camera will take and store 50 High-Resolution pictures.

Battery Indicator:

 

This symbol

indicates the level of battery power. When this indicator

flashes, change the batteries immediately.

AVI Mode:

1.Press the mode button to AVI Mode

2.Then press the shutter button to confirm the setting.

3.Press shutter button to record video clips. The video clips are stored in the camera’s memory.

Delete Single Picture Mode:

1.Press the mode button to Delete Single Picture Mode

2.Then press the shutter button to confirm the setting

3.Press the shutter button 1 time to erase the last picture stored in the camera memory.

5

Image 6
Contents Page Table of Contents Welcome II. Getting Started DC1540 Package ContentsDC1540 Features System RequirementsLCD Screen Mode Features Self-Timer Mode Picture Counter Battery warning III. Powering UpBattery Installation Turning the Power ON/OFFIV. Taking Pictures Taking a SnapshotInstall Arcsoft Programs and Camera Drivers Install Camera DriverInstall Arcsoft PhotoImpression Install Arcsoft VideoImpression VI. Uninstall Arcsoft Programs Install Arcsoft Photo BaseVII. Downloading Photos Using PhotoImpression VIII. Video Playback Using VideoImpression IX. Photo and Sharing Management Using PhotoBase3.0 Specifications