To Windows XP users only:
When the camera is connected to your PC for the first time, the computer will recognize the new device and display a “Found New Hardware” message. You must wait while the computer identifies your camera. If you have already installed the software, the information window will display the name of the device connected. If you have not installed the software, disconnect the camera from your computer and follow the directions under “Installing the Digital Camera Driver Software”.
●The Found New Hardware Wizard will begin automatically. Make sure “Install the software automatically” is selected, and click Next.
●Windows will begin to search for the necessary drivers on your system. These were installed with the software. When your computer locates the drivers, it may display the following message:
Windows XP only:
●Click Continue Anyway. Your camera has been thoroughly tested and will work with your system.
14