Start your Vicam

a. By selecting the Application Program from Start menu as Figure 16

Figure 16

b. You will see the preview picture of VICAM, and you can select below functions when you run the preview mode

Figure 17

1.Snapshot function: just click the snapshot icon to take the picture

2.Delay-Snapshot function: it provides the countdown function from 1-10 seconds for delaying snapshot

3.Multi-Snapshot function: it can setup to take 2 to 30 pictures continuously

4.Motion Detect Snapshot function: it can only catch the moving figures to snapshot by setting the detect area

5.Record function: just click the record icon to make the video in MPEG4 format

6.Motion Detect Record function: it can only tape the moving figures by setting the detect area

7.Schedule function: it can scheduled recording for picture or video