Atlantis Land 800NV manual Mjpeg viewer port

Page 21

3.2.3 MJPEG

Note

MJPEG settings are unavailable if the RTSP mode is ON, which means the MJPEG streaming is closed.

MJPEG viewer port

Unicast streaming Video/Audio port number : Specify the transmission port number of the video data. It is initially set to 8070. Specify an even number from 1024 to 65534.

Note

Unicast streamingSpecify the transmission port number of the video data and audio data used when UDP (Unicast) is selected with the TCP/UDP transmission switching icon in the main viewer.

Image SizeSpecify the image size the network camera transmits. You can choose among 704 × 480, 352 × 240 and 176 × 120 for NTSC mode and 704 × 576, 352 × 288 and 176 × 144 for PAL mode.

Frame rateSet the frame rate of the MJPEG image. Selectable values are 5, 10, 15 fps. The unit “fps” stands for “frames sent per second”.

18

Image 21
Contents Page Cleaning Heed the safety precautionsLegal Caution Case of a breakdownPage Overview 3G Mobile Phone viewing 5G Mobile Phone viewingExample rtsp//100.10.10.18554/video.3gp Requirements System RequirementHow to Use Initial accessing the IP camera Language SettingImage Setup Client SettingLive View SnapshotVideo play buttons Audio buttons:Information SystemDay & Time Initialize Page General CameraRTP If Rtsp mode is on Unicast streaming Computer View Rtsp If Rtsp mode is onMPEG4 Multicast streamingQuality MPEG4 viewer port If Rtsp mode is OFFMobile View Rtsp If Rtsp mode is on Quality Mjpeg viewer port MjpegQuality Information NetworkPage PPPoE Ddns UPnP IP Notification Message Viewer Mode:Set a user to Admin, Operator or Viewer mode SecurityAccount Https FTP Client AdvancePage Alarm sending Cropping is set to Off Periodical sending Page Smtp Page Alarm sending Page Periodical sending Sending Http EventAlarm sending Schedule selection ScheduleMon Monday to Sun Sunday Start time, End timeAlarm Buffer Recording capacityRecording time Page Motion Detection Page System Log Atlantis Land