TANDBERG D11624 manual Approvals, Cable VFX-250S, FCC Class a Digital Devices and Peripherals

Page 12

Tandberg

Video on Frame Relay

8. Approvals

FCC Class A Digital Devices and Peripherals

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

A note about system cables:

To maintain the EMC (ElectroMagnetic Compatibility) performance of the unit, user and network port cables must be high quality, fully shielded cables with EMI/RFI connector hoods.

9. Cable VFX-250S

In order to cable the VFX-250S into a frame relay network, you need to assemble the following cables according to your network requirements:

Console Cable

Network Cable

User Cable

Refer to Appendix A, Cables and Pinouts, for pinouts and wiring diagrams. Plug the +5 VDC power supply into the VFX-250S and plug the supplied power cord into the power supply and a standard AC outlet. Only use the power supply provided by Science Dynamics (P/N LZUSD02001A0200). Connect the VFX-250S console port to a terminal or PC communications port to configure and maintain unit settings. For a video- conferencing application, install the VFX-250S in the frame relay network between the network (FRAD) equipment and the user (video codec) equipment. Please see User Manual for technical details.

D11624 rev.01

12

Image 12
Contents Video on Frame Relay Table of Contents Introduction Background on transmission of video over frame relay Technical issues Cell based systems cut packet into fixed sizes Equipment for Video over Frame Relay Framing the PictureAbout the Product VFX-250S Application Overview Technical Specification of VFX-250S Power Supply Mechanical/EnvironmentalApprovals Cable VFX-250SFCC Class a Digital Devices and Peripherals Economics of Video over Frame Relay Appendix a Cables and Pinouts Standard Console CableStandard EIA-449/RS449 Cables Standard EIA-530/RS530 Cables Standard V.35 Cables Appendix C Glossary and abbreviations AVBAppendix D Information about the manufacturer USA