ENFORCER Mini Indoor Dome Camera
Overview:
Mounting screws | Female BNC connector | |||||||||||||||||||
(not included) | ||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| DC plug with |
Dome cover | Camera | DC jack | terminal block |
|
|
| (not included) |
Before Starting:
1.Please read this manual carefully and keep it for future reference.
2.Use the camera within given temperature and electricity limits.
3.Do not point the camera at the sun. Heat could damage the camera, even when not in use.
4.Do not mount the camera in areas exposed to radiation, strong magnetic fields, or strong electrical signals*
5.Do not drop the camera or subject it to strong vibrations.
Note: Many video monitors produce strong electromagnetic fields close to the display CRT, especially when the monitor is turned on or during
Installation:
1.Run hidden cables from the video source and 12VDC power supply to the camera. Do not cut the DC jack or female BNC connector as this will void the warranty.
2.Test to make sure the voltage is correct. Use only 12VDC.
3.Carefully twist the dome from the base.
4.Hold the camera against the wall, ceiling, or other mounting surface while watching the monitor to find the best mounting location. Mark that location with a pencil.
5.Mount the mounting base to the wall using 4 mounting screws (not included). If mounting to drywall or brick, it may be necessary to use screw anchors (not included).
6.Adjust the camera angle as needed.
7.Test the video signal.
8.Reattach the dome to the camera.
9.Do a final test of the video camera and monitor.
3 |