SECO-LARM USA Elite Series specifications Infrared LEDs, Split-Glass Design To Stop IR Reflection

EV-133C-DWAVQ

56 IR LEDs

Up to 100 ft. (30m) Range

4 - 9mm Varifocal Lens Day/Night Weatherproof

56 Infrared LEDs

These LEDs illuminate the protected area with bright infrared light to a range of up to 100 ft. (30 meters), allowing a single EV-133C-DWAVQ camera to replace multiple cameras at many customer sites.

Split-Glass Design To Stop IR Reflection

Two separate panes of glass–one covering the lens, the other covering the LEDs–are separated by the lens hood to stop the LEDs’ infrared light from reflecting off the glass and back into the lens.

DC Auto Iris Varifocal Lens

The focal length of the lens can be adjusted from 4mm to 9mm via a convenient adjustment screw under the camera. This allows the camera to be set to cover a wide area or focus in on a specific target.

Concealed Cabling Through The

Camera Mount

The power and video cables are concealed in the mount between the camera and the mounting base in order to protect the cables and provide for a more attractive installation.

EV-133C-DWAVQ

Features:

1/3" Sony Super HAD CCD.

550 TV lines for high resolution.

56 IR LEDs: Up to 100 ft. (30m) range. Day/Night Operation (0 lux with LEDs on). DC auto iris varifocal 4 - 9mm lens. External adjustments for zoom and focus. Split-glass design to eliminate IR reflection. CDS sensor.

Wiring concealed in bracket to prevent tampering. Weatherproof IP66 for outdoor use.

Dual voltage: 12VDC or 24VAC.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

16842 Millikan Avenue, Irvine, CA 92606	1.949.261.2999 (CA & Int’l)	1.800.662.0800	Fax: 1.949.261.7326
	Email: info@seco-larm.com	Website: www.seco-larm.com

EV-133C-DWAVQ-Data.cdr