SMC Networks SMCWIPCFN-G2 manual Getting to Know the Camera, Front View

Page 36

1.2 Getting to Know the Camera

Internal Microphone allows the camera to receive sound and voice.

Infrared LEDs

allows your camera to capture clear image in a dark environment.

Lens Assembly

Light Sensor

is used to trigger on and off the Infrared LEDs according the environmental light level.

Power LED indicates the camera is powered on with the steady amber light.

Link LED indicates the camera’s network connectivity with the flashing green light.

USB Port allows you

to connect an external USB device.

It provides the power distribution up to 500mA.

USB Unmount Button is used to remove the connected USB device safely.

Front View

The camera’s USB port supports WCN (Windows Connect Now) technology, allowing users running Windows Vista or Windows XP (with SP2) to create the network configuration settings on a PC or laptop, save them to a USB device and transmit them to the camera by connecting the USB device to the USB port.

- 34 -

Image 36

Contents SMCWIPCFN-G2 Copyright TrademarksWarranty Product Registration Compliances Important Note Industry Canada Statement Etsi EN 300 Page Czech Danish German Page Page Page Portuguese Slovenian Slovak Finnish Swedish Icelandic Norwegian Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Information for Power Source Underwriters Laboratories Compliance StatementPage Contents Appendix Introduction to the Camera describes the features PrefaceChecking the Package Contents Chapter Introduction to the CameraGetting to Know the Camera Front ViewRear View Screw thread is used to connect the camera standFeatures and Benefits „ Supports Connection to the External Devices „ Multiple Platforms Supported„ Multiple Applications Supported „ Accessing the Camera using a Web Browser „ Accessing the Camera using Web browserSystem Requirement „ NetworkingInstalling the Camera Stand Camera StandConnecting the Camera to a LAN Connecting the External Antenna Applications of the Camera Home ApplicationsChapter Accessing the Camera Using IPFinderAccess the Camera Page Page Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationUsing Smart Wizard Camera SettingsIP Settings Email Settings Wireless NetworkingBasic Setup Confirm SettingsBasic System Basic Date & Time„ Basic „ Indication LED„ Administrator Basic User„ General User „ Guest Network Settings „ IP Settings Network NetworkDdns Setting Network IP Filter„ UPnP „ Port NumbersNetwork Wireless Setting „ Wireless„ Deny IP List Network ID SsidCamera Infrastructure or Ad-Hoc WPA-PSK Setting up Video & Audio „ Image Setting „ Overlay SettingVideo & Audio Camera Video & Audio Video Levels Lowest, Low, Medium, High, and Highest„ Mjpeg „ 3GPPVideo & Audio Audio „ Camera Microphone„ Camera Speaker Out Event Server Configuration Event Server Setting FTP „ FTPEvent Server Setting Email „ EmailEvent Server Setting Network Storage „ Net StorageMotion Detect Event Config Event Configuration General SettingEvent Configuration Arrange Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Schedule Trigger„ Factory Reset „ System RebootTools „ Configuration „ Update Firmware10 USB „ USB Setting „ USB Dismount„ USB Information Information „ Device Info„ System Log Logs table displays the events log recorded by the system Specification Power DC 5V/2.5A „ Communication„ System Hardware Processor ARM9 base 8MB NOR FlashReset „ User InterfaceLEDs „ Audio InputGlossary of Terms NumbersDhcp Enterprise Hex ISP PCM RTP Smtp UDP Smcwipcf