Parts List, Dimensions, Installation | SECO-LARM USA EV-122C-DXB3Q

SECO-LARM BALL-MOUNTIR DOME CAMERA Manual

SpecificationsEV-122C-DXB3Q (NTSC)

____________________________________________________________________________________________________

Type	Color camera
Chip	1/3” Sony Super HAD II CCD
_________________________________________________________________________________________________________________________ ___ ___ ____ _______ _______________________________________________________
Resolution	420 TV lines
Pickup elements	510x492 pixels
Scanning system	2:1 interlace, V: 60Hz, H: 15.734KHz

CA-161T- DC plug included.

To BNC

(From DC

Camera) (CA-161T)

Parts List

1 x Camera Ball

1 x Case (2-part construction)

1 x Base

3 x Screws

1 x Manual

1 x DC plug with terminal block

Sync	Internal
Video output	1.0Vp~p composite output, 75 ohms
Lens	F1 2, 3.6 mm (lens included)
IR LEDs	24
IR distance	Up to 50 ft. (15 m)
IR view angle	50o~80o Beam spread, 30o per LED
Minimum illumination	0 05 lux, (0 lux with IR on)
Gamma correction	0.45
S/N ratio	>50dB
Shutter control	Auto Electronic Shutter (AES) 1/60~1/100,000 sec. (NTSC)
Automatic gain control	Auto
White balance	Auto, 2500o~9500o K
Power source	12 VDC ±10%
________________________________________________________________________________________________________________________ ___ ___		___________________________________________________________
Power consumption	70 mA LEDs off, 200 mA LEDs on
Storage temperature	-4°~122° F (-20°~50° C)

Power

3 xConnector

Screws

BNC

Connector

Case	Camera
	Ball	Case	Base

Operating temperature	14°~122° F (-10°~50° C)
Dimensions	311/16” x 211/16” (93 x 69 mm)
Weight	6 oz. (170 g)

Dimensions:

BEFORE STARTING

1.Please read this manual carefully and keep it for future reference.

2.Use the camera within given temperature and electrical limits.

3.Do not mount the camera where it is exposed to rain or other moisture, or in humid or dusty places.

4.Do not point the camera at the sun. Heat could damage the camera, even when not in use.

5.Do not mount the camera in areas exposed to radiation, strong magnetic fields, or strong electrical signals.*

6.Do not open or disassemble the camera. There are no user- serviceable parts inside.

7.Do not drop the camera or subject it to strong vibrations.

*Note: Many video monitors produce strong electromagnetic fields close to the display CRT, especially when the monitor is turned on or during de-Gaussing, which occurs automatically with many monitors when the monitor is turned on.

211/16”

(69mm)

311/16” (93mm)

INSTALLATION

1.Run a 12VDC power supply wire and a video cable with a male BNC connector through the wall to where the camera is to be mounted.

2.Temporarily connect the camera to the 12VDC power supply.

3.Temporarily connect the camera’s female BNC connector to the video cable’s male BNC connector.

4.While watching the monitor, hold the camera against the wall by hand where it is to be mounted, then turn the camera until it is certain that this mounting location is correct. Use a pencil to mark the location of the three screw holes in the base.

5.Disconnect the 12VDC power supply and video cable.

6.Mount the bracket to the wall using the three included mounting screws. If the wall is made of dry wall, brick, or similar material, it may be necessary to use screw anchors (not included).

7.Reconnect the 12VDC power supply and video cable. Turn the monitor on, and make sure the camera is sending the proper video signal.

8.Adjust the camera angle.

9.Put the case over the camera ball and twist to secure to the base.

10.Do a final test of the video camera and monitor.

*Note: The base also allows flush-mounting of the camera. However, for the best security, run the wires through the wall.

EV-122C-DXB3Q specifications

The SECO-LARM USA EV-122C-DXB3Q is an advanced access control system designed to enhance security in various environments, from commercial buildings to residential properties. This innovative device stands out due to its robust feature set and user-friendly design, making it an ideal choice for those seeking reliable and sophisticated access control solutions.

One of the main features of the EV-122C-DXB3Q is its ability to support a wide range of access methods, including RFID proximity cards and key fobs. This versatility allows users to choose the most convenient and secure access option for their specific needs. The device also supports a PIN code entry system, providing an additional layer of security for users who prefer to access their premises using numeric codes.

In terms of technology, the EV-122C-DXB3Q employs advanced processing algorithms that ensure rapid identification and access approval, significantly minimizing wait times. This is especially useful in high-traffic areas where efficiency is paramount. Additionally, the device is equipped with a built-in relay that allows it to connect with various door locking mechanisms, enabling seamless integration into existing security systems.

The EV-122C-DXB3Q features a durable, weather-resistant design, making it suitable for both indoor and outdoor applications. This resilience is augmented by the device’s high-quality materials, which are specifically chosen to withstand the elements and potential tampering attempts. Users can trust that the EV-122C-DXB3Q will maintain functionality even in challenging conditions.

Another notable characteristic is its user-friendly interface, which simplifies the process of adding or removing access credentials. This ease of use is critical for facilities with fluctuating personnel needs, allowing for quick updates without the need for extensive training. The device can support a significant number of users, making it ideal for larger organizations.

Moreover, the EV-122C-DXB3Q comes with comprehensive documentation and support from SECO-LARM, ensuring that users can easily navigate installation and troubleshooting processes. This level of customer service demonstrates the manufacturer's commitment to customer satisfaction.

In conclusion, the SECO-LARM USA EV-122C-DXB3Q is a powerful access control system that combines advanced technology, robust features, and practical design. Its flexibility in access methods, rapid processing capabilities, and durable construction make it an excellent choice for enhancing security across various settings. Whether for a corporation or a small business, this device offers reliable performance that users can depend on.