TROUBLESHOOTING
The Camera and | You should... | |
or Monitor Has: |
|
|
No Power | 1. Check that the power cord(s) is properly connected. | |
| 2. | Check that the monitor is turned ON. |
| 3. | Wrong AC/DC adapter used. Check that the adapter |
| labeled OUTPUT: 8V DC is connected to the camera, and | |
| adapter labeled OUTPUT: 5V DC is connected to the monitor. | |
No picture. | 1. Check the channel switch settings on the camera (s) and | |
Distorted picture | monitor. Make sure the channels match on both units. | |
| 2. | Signal interference from a microwave oven. Check if a |
| ||
| the camera and monitor. If so, turn it off or move it out of the | |
| path. | |
| 3. | Signal interference from other signal producing devices. |
|
| (a) Identify and eliminate the source of the interference. |
|
| (b) Relocate the camera and/or monitor closer to each other. |
| 4. | (c) Change the channel setting on both camera and monitor. |
| Camera and monitor are too far apart. Relocate the | |
| camera and/or monitor. | |
|
|
|
SPECIFICATIONS
RECEIVER: |
|
SCREEN SIZE | 2.5" TFT LCD |
DOT PITCH | 0.1025 x 0.163 mm |
RESOLUTION | 480 x 234 |
POWER SUPPLY | 5V DC, 1A |
OPERATING TEMP. 32°F - 140°F | |
| 0°C - 60°C |
DIMENSIONS | 130x80x38mm |
BATTERY | 2 Lithium Ion |
Rechargeable batteries.
CAMERA: |
|
IMAGE SENSOR .... | 1/3" Color CMOS |
| Image Sensor |
RESOLUTION | 380 Horizontal TV Lines |
POWER | 8V DC |
ILLUMINATION | 1.0 Lux |
OPERATING TEMP..14°F - 122°F | |
| |
DIMENSIONS | 92x89x67mm |
WEIGHT | Approx. 70g |
w w w . s v a t . c o m