SVAT ELECTRONICS
7.3. MOTION DETECTION SETUP
now you can see
Motion detection sensitivity setup:
Changing the threshold value setup will affect the recording sensitivity of the motion detect recording. When set to Motion Detection, the PI1000 will only start recording when the movement on screen exceeds the Motion Detect (MD) Threshold. Any motion (MD Energy) that is less than the preset MD Threshold will not trigger motion detect recording. Any MD Energy that is greater than the MD Threshold will trigger motion detect recording. For example, if you are recording in a room with an open window, the movement of your curtains may trigger motion detect recording. If this occurs, you can set the MD Threshold to only record when the movement is greater than that of the curtains. You can test how much MD Energy is generated by aiming the PI1000 at a steadily moving object. The MD Energy bar will fluctuate based on the movement of the object. If the Energy Bar moves past the MD Threshold (red line), then you should move the MD Threshold to a higher value to avoid false triggers.
1.Sensitivity Bar:
2.MD Energy:
3.MD Threshold:
The black bar indicates the amount of movement and the red line indicates the MD threshold.
The amount of movement generated by the moving object.
Press the | and | button to change the motion |
detection threshold value. |
| |
PI1000 | 13 |