Rollei 140 manual Initial Settings, Setting the Date and Time, EN-14

Initial Settings

Setting the Date and Time

The date/time needs to be set if and when:

„The camera is turned on for the first time.

„The camera is turned on after leaving the camera without the battery for an

extended period of time.

When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time.

1.	Slide the mode switch to [ ] or [ ]; or press
	the	button.
2.	Press the		button.
3.	Select [Setup] with the f button.
4.	Select [Date/Time] with the c / d buttons, and
	press the		button.
5.	Select the date format with the c / d buttons,
	and press the		button.

„Select the item’s field with the e / f buttons

	and adjust the value for the date and time
	with the c / d buttons.
„	The time is displayed in 24-hour format.
„	After confirming all settings are correct, press		!
	the	button.

6. To exit from the [Setup] menu, press the button.

EN-14