POWER ON SETUP
1CF AUTO REPAIR: CF auto repair on/off during power on.
2RF CHANNEL: RF channel selection during power on.
3SPK VOLUME: Speaker volume setup during power on.
4LCD: LCD on/off during power on
RETURN TO FACTORY DEFAULT VALUE
TROUBLESHOOTING
APower
Q:Why are there no images after power-on?
A:a. Power LED is unlit: indicates power failure or insufficient power.
b. Power LED is lit: please check the input source (camera or AV). When RF input source is used, please make sure that the camera and the main device have been setup to the same channel. When
AV IN input source is used, please make sure that the AV line is properly connected to the camera (Video/ Audio terminal); otherwise check the camera video output line connections.
Q: Which type of batteries to choose from?
A:Please use nickel metal hydride (NiMh) or alkaline batteries for the power supply.
BCamera
Q:Why does video interference occur when using wireless IR camera?
A: a. Please make a channel adjustment, make sure that the camera
GX5400: 2.4GHz Wireless Digital Video Recording System | 15 |