Sharp XV-Z17000 operation manual 3D Glasses lenses, 3D Glasses infrared receiver

Page 59

Note

These 3D Glasses can only be used with Sharp 3D-compatible LCD TVs or projectors that use infrared control technology.

3D Glasses lenses

Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses.

Do not scratch the surface of the lenses of the 3D Glasses with a pointed instrument or other object. Doing so may damage the 3D Glasses and reduce the quality of the 3D image.

Use only the cloth provided with the 3D Glasses to clean the lenses.

3D Glasses infrared receiver

Do not allow the infrared receiver to become dirty, and do not attach stickers to or otherwise cover the infrared receiver. Doing so may prevent the receiver from operating normally.

If the 3D Glasses are affected by other infrared data communication equipment, the 3D images may not be displayed correctly.

Caution during viewing

Do not use devices that emit strong electromagnetic waves (such as cellular phones or wireless trans- ceivers) near the 3D Glasses. Doing so may cause the 3D Glasses to malfunction.

The 3D Glasses cannot operate fully at extreme high or low temperatures. Please use them within the specified usage temperature range.

If the 3D Glasses are used in a room with fluorescent lighting (60 Hz), the light within the room may ap- pear to flicker. In this case, either darken or turn off the fluorescent lights when using the 3D Glasses.

Wear the 3D Glasses correctly. 3D images will not be correctly visible if the 3D Glasses are worn upside down or back-to-front.

Other displays (such as computer screens, digital clocks, and calculators) may appear dark and difficult to view while wearing the 3D Glasses. Do not wear the 3D Glasses when watching anything other than 3D images.

If you lie on your side while watching the screen with 3D Glasses, the picture may look dark or may not be visible.

Be sure to stay within the viewing angle and optimum viewing distance when watching 3D images. Oth- erwise, you may not be able to enjoy the full 3D effect.

The 3D Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or projector. If this occurs, turn off the other 3D product or electronic devices or keep the devices as far away as possible from the 3D Glasses.

Stop using this product in any of the following situations:

When images consistently appear doubled while you are wearing the 3D Glasses

When you have difficulty perceiving the 3D effect

If the 3D Glasses are faulty or damaged, stop using them immediately. Continued use of the 3D Glasses may cause eye fatigue, headaches and illness.

If you have any abnormal skin reaction, stop using the 3D Glasses. In very rare instances, such reactions may be due to an allergic reaction to the coating or materials used.

If your nose or temples become red or you experience any pain or itchiness, stop using the 3D Glasses. Pressure caused by long periods of use may lead to such reactions and may result in skin irritation.

Useful Features

-57

Image 59
Contents XV-Z17000 Special Note for Users in the U.K See bottom of projector IntroductionDeclaration of conformity InformationInfo Indicates safeguards for using the projector Using the Menu ScreenContents Reference Appendix Maintenance Maintenance Indicators Regarding the LampDamage Requiring Service CleaningAccessories Power-Cord ProtectionDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Using the 3D GlassesOptional accessories AccessoriesSupplied accessories Projector Part Names and FunctionsTerminals Projector Rear ViewRemote Control Usable Range Using the Remote ControlWhen using the remote control Inserting the BatteriesPlace the projector facing a screen Quick StartTurn the video equipment on and start playback Select the input modeAdjust the projector angle, focus and zoom Turn the power offExample of standard setup Setting Up the ProjectorSetting Up the Projector Standard Setup Front ProjectionCeiling-mount Setup Projection PRJ ModeScreen Size and Projection Distance Samples of Cables for Connection You may need other cables or connectors not listed belowConnecting to Equipment with S-video Output Terminal Connecting to Video EquipmentConnecting to a Computer Using the RGB Cable Connecting to a ComputerControlling the Projector by a Computer For details on RS-232C specifications and commands, seeTurning the Projector On/Off Connecting the Power CordAbout the Lamp Indicator Direct Power Off functionAdjusting the Height Adjusting the Projected ImageAdjusting the Focus Adjusting the Picture SizePress Keystone Press Keystone to enter the keystone modePress P/R/O/Q to adjust Keystone Correction Keystone Correction Sphere Press P/R/O/Q to adjust Sphere Correction modePress P/R/O/Q to adjust Rotation Correction mode Press P/R to select SPHERE, and then press EnterImage Shift Switching the Input ModeAdjusting the Vertical Horizontal Position Image Press Image Shift to enter the image shift modeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying the Black Screen TemporarilyHiding the Menu Temporarily Switching the Iris SettingSwitching the Eco+Quiet Mode Displaying an Enlarged Portion of an ImageResize button Resize ModePress Resize on the projector or on the remote control Resize ModeAbout Copyrights Picture menu Menu Bar ItemsUseful Features 3D Menu Press Menu Using the Menu ScreenMenu Selections Adjust- ments Press or to select the item To adjust the projected image while viewing itYou want to adjust Press or \ to adjust the item selected2Adjusting the Image Picture Adjustment Picture Menu1Selecting the Picture Mode 4Eco+Quiet 3Switching the Iris Setting7Adjusting the Colors 5Using the AdvancedS. color adjustment screen EResetting All Adjustment Items 8Adjusting the Bright Boost9Selecting the Film Mode 0Setting Detail Enhancement3Auto Sync Auto Sync Adjustment Computer Image Adjustment SIG-ADJ Menu1Adjusting the Computer Image 2Setting the Resolution6Setting the Video Setup 5Setting the Video System 7Adjusting the Dynamic Range8Signal Info 3Adjusting the Overscan Adjusting the Projected Image SCR-ADJ Menu1Setting the Resize Mode 2Adjusting the Image PositionOr Q 5Keystone Mode Correction4Auto V-Keystone Correction 9Selecting the Menu Screen Position 6Setting On-screen Display7Setting the Brightness Menu Screen 8Selecting the Background Image2Setting the Power Save Mode Economy Mode Adjusting the Projector Function PRJ-ADJ Menu3Setting One Touch Play, System Standby and Input Name 1Setting Auto Power Off Mode8Lamp Timer Life 4Setting the Demo Mode6Fan Mode Setting 7Returning to the Default SettingsEnjoying 3D Image Viewing Precautions on using 3D Glasses Epilepsy As you get more comfortable viewing 3D imagesPart Names Supplied Accessories for 3D GlassesInsert the screw to secure the bat Before Using the 3D GlassesReplacing the Button Cell Battery Close the battery coverUsage Range of the 3D Glasses Using the 3D GlassesAttaching the Nose Pad Attaching the 3D Glasses BandTurn on the 3D Glasses and place them over your eyes When 3D Auto Change is set to YesWhen 3D Auto Change is set to No Viewing 3D Images3D Menu screen is displayed Press 3D MenuPress P/R to select 3D Press O/Q to select On or Off Press P/R to select 3D Format, and then press Enter3D Settings 3D Menu 3D Format is set to Auto automatically Frame rate is changed Setting the 3D Format Menu3D Glasses infrared receiver 3D Glasses lensesSpecifications 3D Glasses Cleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensIndicators on the Projector Maintenance IndicatorsAbout the temperature warning indicator About the lamp indicatorNot illuminate Down Outlet, and then connect it again Replacing the Lamp Regarding the LampLamp Remove the lamp unit cover Removing and Installing the Lamp UnitResetting the Lamp Timer Component Input Connecting Pin AssignmentsHdmi Terminal Computer InputComputer control RS-232C Specifications and CommandsCommands Computer Input Video Input Computer Compatibility ChartDTV Problem Check TroubleshootingReplace the lamp 3D images are not Switch to 3D mode For Sharp Assistance Hdmi SpecificationsUnits inches mm DimensionsIndex Sharp Corporation
Related manuals
Manual 82 pages 52.81 Kb