Planar owner manual LT3200 Owner Manual 11 P a g e

Page 11

4- Locate the video connector in cable assembly as shown in photo 4 at right.

5- Orient the video plug as seen in Photo 5A. Insert the edge into its socket on the video board.

Align the connector parallel to the socket and gently slide the connector into the socket (Photo 5B). Using steady pressure between thumb and fingernail of index finger, seat the connector. A properly inserted connector will

have the backside of the connector located parallel to the socket. The white arrows (Photo 5C) point out the slots in the socket that should be fully filled with the white color of the connector.

6- Place the video ground clasp around the bare-metal section of the video cable and attach it to the standoff near the LED connector on the LED driver board. See photo 6 at right.

LT3200 Owner Manual 11 P a g e

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Planar LT3200 Owner Manual Page Table of Contents Important Instructions Precautions and WarningsII. LT3200 Product Description Edge Views of the Display III. LT3200 Display ComponentsTop View IV. Product Architecture Designing an Enclosure for your LT3200 LT3200 Owner Manual 10 P a g e VI. Connecting the Driver BoxLT3200 Owner Manual 11 P a g e LT3200 Owner Manual 12 P a g e VII. Presentation of Your Material using the LT3200 VIII. Appendix Driver Box Drawing Troubleshooting LT3200 Specifications Page Graphics Input Compatibility Regulatory Compliance
Top Page Image Contents