The image should be restored in within 2 minutes.
Poor atmospheric conditions such as fog, haze or extremely dark environments, will decrease the visibility distance of the unit.
9. WARRANTY:
NEWCON OPTIK warranties this product against defects in material and workmanship for one year from the date of the original consumer's purchase, but no more than 18 months from the date of manufacturing. Should your NEWCON product prove defective during this period, please bring the product securely packaged in its original container or an equivalent, along with proof of the date of original purchase, to your NEWCON Dealer. NEWCON will, repair (or at its option replace), the product or part thereof, which, on inspection by NEWCON, is found to be defective in materials or workmanship.
What This Warranty Does Not Cover:
NEWCON is not responsible for warranty service should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, damage caused by disasters such as fire, flood, lightning, improper electrical current, or service other than by a NEWCON Authorized Service. Postage, insurance, or shipping costs incurred in presenting your NEWCON product for warranty service are your responsibility. Please include a cheque or money
order made out to NEWCON OPTIK for the amount of US$15.00 to cover shipping and handling.
NEWCON OPTIK may replace any product that has been discontinued or is out of stock, by another current product of comparable value and function.
14
1. IMPORTANT INFORMATION
Read prior to activation
You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted.
•NEVER disassemble the unit. This device contains high voltage, which may be hazardous to your health!
•NEVER expose the opened objective lens of an active unit in daylight. (Note: 1st generation units will still remain active for a few minutes after switching the unit off). During the day objective lenses must be covered by their caps. There is a tiny hole in the cap to provide enough light for daytime operation. The unit can be turned on in the daytime, but again, caps must cover the lens.
3