Jensen KT7015A Start to Use, Install Battery, Charge Battery, Use SD Card, Switch on/off

Page 10

Start to Use

Install Battery

1.Open Battery Lid.

2.Install the battery as per the tip drawing on the front of the lithium battery (see drawing at right) so as to ensure proper installation.

3.Replace the battery lid.

4.Remove the battery if you do not plan to use the camera for a long period of time. period. period of time.

Charge Battery

1.Power off the camera.

2.Connect the camera to the computer USB port with USB cable to charge the battery.

3.During charging, Busy light is on in green and will be off when the battery is fully charged.

Use SD Card

1.Push the SD card into the slot until it is completely inserted.

2.Press its tail in slightly to eject the SD card out.

Switch on/off

1.Switch on: press Power key and the screen will light up.

2.Switch off: press the Power key and the screen will turn off.

If the Auto Switch-off of the camera is set at 60s or 120s, after switch-on, if it is idle for 1min or 2min, it will automatically power off.

10

Image 10
Contents Digital Camera KT7015AContents Contents………………………………………………………………………………….…………….2 Computer Connection……………………………………………………………………………...30 ……………………………………………………………………………………………………41Preface System Requirements CPUGeneral Memory and SavingMaintenance and Care Other NoticesInstall Driver Page Switch on/off Install BatteryCharge Battery Start to UseBody AppearancePage Page Keys Capture/Video Mode Functions Playback Mode Functions Functions of KeysStandard Accessories Basic OperationRecording Menu SettingsCapture PlaybackCapture Mode Step OperationIcons displayed on Instructions Screen Image quality Fine Submenu 10SEC Upgrade Video Mode Icons displayed Instructions On the screen Playback Mode 20FPSVideo playback Page Delete current Yes Delete all Rotate Computer Connection Fig. Ⅱ, or in Media window Fig. Ⅲ, clickFig. Ⅰ Page Software Installation and Use PhotoImpression 5 Installation and UseFollowing window Page Page Page VideoImpression 2 Installation and Use Install VideoImpressionPage Specifications JpegSwitched on Installation Rays in the environment are not sufficient. Please take Compliance with FCC Regulations Service