LOREX Technology SHS-2S instruction manual Connecting Cameras

Page 14

Camera Installation

Connecting Cameras

1. Connect the female end of the supplied 57’ extension cable to the camera.

NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function.

2.Connect the male end of the supplied 57’ extension cable to an open camera input on the back of the SHS-2S switcher. Continue connecting additional DIN cameras.

NOTE: The arrow on the DIN Camera should be facing up when connecting the DIN Extension Cable to the SHS-2S switcher.

Image 14

Contents Model Page Important Safeguards InstallationService General Precautions General PrecautionsSHS-2S Features Table of Contents Getting Started SHS-2S Front View SHS-2S Front View SHS2S Side View SHS-2S Rear ViewSHS-2S Cameras Input CableCamera Installation Installation WarningsConnecting Cameras Connecting the SHS-2S A/V Cable Connectivity DiagramSHS-2S System Specifications Appendix #1 Control Box SpecificationsIt’s all on the web