Access the Menu System | LOREX Technology SHS-4QM Series specification

Time	Tools	Skills - Easy
Under 20 Minutes*		Hand Tools	easy
			Plug & Play connectors, On
* Installation time may vary based
			screen set up
on application and camera cabling

Full Function Remote Control with Multiple Viewing Modes

PIP	Dual PIP	Freeze

Split

Quad

Zoom

A:Access the Menu System

•Press the MENU button for 3 seconds to enter Menu Mode.

•Press the buttons to navigate within the Menu and choose the desired selection.

•Press the ENTER button to accept the selection.

•Press the MENU button to Exit the Menu Setup.

www.lorexcctv.com

For detailed setup information, please refer to your User’s Manual. For additional information, please visit our website

www.lorexcctv.com/support

•Use the arrows to move between cameras.

•Use the arrows to move between Menu Settings.

•Set the Motion Detection Time as desired (Always ON, OFF or for a specific timeframe).

•Set the Sensitivity (amount of motion needed to trigger an alarm) and the Velocity (speed of motion needed to trigger an alarm).

•Set the Masking Area:

·Use the arrow keys to navigate through grid.

·Press the ENTER button to select or deselect a square on the grid.

·Areas set to detect motion are not shaded. Masked areas in blue do not detect motion.

·Each area (grid square) must be selected individually.

•Press the MENU button to Exit. All settings will be saved.

•Use the arrow keys to navigate

•Press ENTER to turn on ALARM EVENT REPORTING for each camera detecting Motion.

•Press ENTER to turn on MOTION EVENT REPORTING for each camera detecting Motion.

•When Motion is detected, the SHS system will switch to the Camera, and an audible alarm will sound.

SHS-4QM SERIES Quick Set-Up Guide R1