Specifications
ENCLOSURE
Power Requirement | 24V AC/ 9W |
|
|
Heater Operation Level | On: 15°C ±3°C / 59°F ±5.4°F |
| Off: 25°C ±3°C / 77°F ±5.4°F |
|
|
Blower Operation Level | On: 35°C ±3°C / 95°F ±5.4°F |
| Off: 25°C ±3°C / 77°F ±5.4°F |
|
|
Weatherproof Rating | IP66 |
|
|
Emclosure Dimensions | 142(W)x370(D)x115(H)mm / |
| 5.6(W)x14.6(D)x4.5(H)in |
|
|
Emclosure Window | 74(W)x63(H)mm / |
Dimensions | 2.9(W)x2.5(H)in |
|
|
Wall Mount Bracket
Bracket Length205mm / 8.1in
Maximum Supported Weight 10kg / 22lbs
Swivel Angle | up to 360° |
|
|
•Use a UL/CSA approved 24V AC power supply.
•Use an appropriate low voltage power cable to prevent fire or electrical shock.
•Make sure to install the camera in an area that can support the camera weight.
•There are no user serviceable parts inside the enclosure. Please do not disassemble the enclosure.
•Do not clean the lens cover with an abbrasive cleaning
•This housing is not recommended for use with cameras featuring IR LEDs, due to the potential of reflection.
It’s all on the Web!
Product Information | Specification Sheets |
| |
User Manuals | Software Upgrades |
| |
Quick Start Guides | Firmware Upgrades |
|
VISIT:
www.lorexcctv.com
Lorex Technologies Inc.
Copyright © 2008 Lorex Technologies Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE
WEATHERPROOF CAMERA ENCLOSURE
WITH HEATER AND BLOWER
QUICK START GUIDE
English Version 1.0
MODEL:
ACC1721HB
www.lorexcctv.com