LOREX Technology QLR-0440 Series instruction manual Mail Setup, Mail Information

9. Mail Setup

Mail Information:

Mail Enable: Check to enable the e-mail function.

Sender information: Enter the name, mail address, and SMTP Server of the sender. *SMTP (Simple Mail

Transfer Protocol) Server: (If not known, this may be obtained from the Internet Service Provider).

Working time: Schedule the time frame during while the e-mail function will be able to activate.

Minimum interval between two consecutive mails: Sets the minimum interval between two consecutive e-mails. (1~60 min)

Delay for capturing image after alarm: Sets the delay time for capturing an image after an event occurs. (0~60 sec)

Recipients Information: Enter the mail address of a recipient and click ‘Add’. It will then be added to the list.

Send test mail: Use this option to send a test message to the recipient. This can result downloaded on a k

- 29 -