Vivotek PT7137 manual Electromagnetic Compatibility EMC, Liability

Page 79

Electromagnetic Compatibility (EMC)

This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions.

•This device may not cause harmful interference, and

•This device must accept any interference received, including interference that may cause undesired operation.

USA - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partial installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the seperation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with emission limits.

Europe - This digital equipment fulfills the requirement for radiated emission according to limit B of EN55022/1998, and the requirement for immunity according to EN50082-1/1992.

Liability

Vivotek Inc. cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Vivotek Inc. makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for any particular purpose.

Page 78 Page 79
Image 79
Page 78 Page 79
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents Hardware installation InstallationTo install in wireless LAN To install in EthernetSoftware Installation Page Page Page Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityView capabilities ConfigurationClient Settings Camera viewPage Pan Pan/tilt control buttonsPan speed Tilt speedClient settings Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images For Viewing by Mobile PhoneOnly Quality Images Will Do Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpUrl http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPThis value from 1025 to Motion detection Snapshot file name prefix Application settingsSnapshot Weekly scheduleMethod for sending snapshot Sequential operationPage System log Viewing system parameters Calibrate MaintenanceReset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Response Set server parameter valuesWhere parameter pair is parameter=value\r\n Yyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group Security255.255.255.0 192.168.0.99Than 40 characters 5558 Group Wireless restartDefault 5540.0 000000000000000000 Group IPFilterComputer 256176x144 for mobile 640x480 ForFor 60Hz only 512000Gamr for mobile AAC4 for computer12200 Tilt speed To take effect 514 Camera ControlScript.vssx IP addressSyntax RecallApplication page CGI command Weekday Account management Capture single snapshotPrivilege=conf System logsConfiguration file Post data Upgrade firmwareNetworking Technical specificationsTechnology License Notice Liability Electromagnetic Compatibility EMC

PT7137 specifications

The Vivotek PT7137 is a cutting-edge IP camera designed for versatile surveillance applications. This model is particularly known for its advanced pan-tilt-zoom (PTZ) capabilities, making it an ideal solution for monitoring large areas with ease and precision.

One of the standout features of the Vivotek PT7137 is its powerful 3-megapixel image sensor, which delivers high-resolution video footage with clarity and detail. The camera supports H.264 compression technology, which optimizes video quality while minimizing bandwidth consumption. This feature is crucial for organizations that require consistent video streaming without overwhelming their network resources.

The PT7137 offers an impressive pan range of 340 degrees and a tilt range of 90 degrees, allowing users to cover extensive areas without needing multiple cameras. This flexibility is complemented by its 3x optical zoom function, which provides the ability to zoom in on specific areas for closer inspection. The camera can also be programmed for preset positions, enabling automated scanning of key locations.

Another notable aspect of the Vivotek PT7137 is its IR-cut filter and built-in IR illuminators, which ensure clear night vision surveillance even in complete darkness. The camera can capture high-quality images in low-light conditions, making it highly effective for 24/7 monitoring.

Additionally, the PT7137 supports Power over Ethernet (PoE), allowing for easy installation and reduced cabling requirements. This technology simplifies the setup process, making it easier to deploy in various environments, whether residential or commercial.

Vivotek's Smart Stream technology further enhances efficiency by enabling users to customize streaming parameters based on network conditions. This flexibility ensures optimized performance and storage efficiency, allowing for longer retention of recorded footage without compromising video quality.

The camera also features a weather-proof housing, making it suitable for both indoor and outdoor applications. With an operating temperature range of -30 to 50 degrees Celsius, the PT7137 is capable of functioning under various environmental conditions, ensuring reliable performance in diverse settings.

In summary, the Vivotek PT7137 is a robust PTZ camera that combines high-resolution imaging, advanced features, and flexible deployment options. Its intelligent technologies and durable design make it a valuable asset for any surveillance system, providing peace of mind through effective monitoring capabilities.
Top Page Image Contents