Vivotek FD6121 manual Viewing System Log, Viewing System Parameters, Factory Default

Page 60

Viewing System Log

Click on the link on the configuration page to view the system log file. The content of the file provides useful information about configuration and connections after system boot-up.

Viewing System Parameters

Click on this link on the configuration page to view the entire system’s parameter set. The content is the same as those in CONFIG.INI.

Factory Default

“Factory default”

Click on this link on the configuration page to restore factory default settings. Any changes made so far will be lost and the system will be reset to the initial factory settings. After clicking on the “Restore” button and make confirmation, the system will restart and require the installer program to set up the network again.

“Calibrate”

Recalibrate the home position to the default center to recover the tolerance caused by some external forces. This function is the same as the “Center” button on the Remote Controller. Please note that there is no confirming message box after clicking on the “Calibrate” button, the Network Camera will calibrate immediately.

- 56 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Image 60

Contents Page Technical@vivotek.com Sales@vivotek.com Before You Use This Product Package Contents Table of Contents Smtp FTP Appendix886-2-82455282 886-2-82455532 Hardware Installation Ethernet ConnectionMount the Camera 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Software Installation 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings Both886-2-82455282 886-2-82455532 Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will DoSomewhere Between Real-time and Clear Images Select for Motion JpegProtect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceBuild a Multimedia Web Attraction Site More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected 886-2-82455282 886-2-82455532 Definitions in Configuration System Parameters User Group Administration 886-2-82455282 886-2-82455532 Edit User Network Settings GeneralHttp Streaming886-2-82455282 886-2-82455532 Ddns & UPnP 886-2-82455282 886-2-82455532 Mail & FTP Smtp886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Video Codec Parameters 886-2-82455282 886-2-82455532 Image Settings Contrast, HueCamera Settings Audio 886-2-82455282 886-2-82455532 Motion Detection 886-2-82455282 886-2-82455532 Application Setup Weekly ScheduleEvent Operation Sequential Operation Naming rule of snapshot file FTP886-2-82455282 886-2-82455532 Factory Default Viewing System LogViewing System Parameters Troubleshooting AppendixFrequently Asked Questions 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 URL commands of Network Camera OverviewStyle convention General CGI URL syntax and parameters Get server parameter valuesMethod GET/POST Example request IP address and it’s response Set server parameter values NosyncWirelessNetwork Camera With Pan/Tilt/Zoom Available parameters on the serverSkip to invoke default server Yyyy/mm/ddHhmmss Blank 192.168.0.99 255.255.255.0Disable passive mode of primary FTP 5003 5002120 384000 For Ntsc only8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Application page CGI command Script.vssxSyntax Sun Resetdo Drive the digital outputQuery status of the digital input Query status of the digital output Capture single snapshot Account management System logs Privilege=dido&privilege=listenConfiguration file System InformationPreset Locations Parameter Value Description Addpos Text String Technical Specifications NetworkingTechnology License Notice MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC