Vivotek PZ7121, PZ7111 manual Wireless LAN PZ7112/PZ7122 only

Page 40

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Wireless LAN (PZ7112/PZ7122 only)

SSID (Service Set Identifier): It is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default. Note: The maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, > and space character.

Wireless mode: Clicking on the pull-down menu to select from the following options:

Infrastructure: Make the Network Camera connect to the WLAN via an Access Point. (The default setting)

Ad-Hoc: Make the Network Camera connect directly to a host equipped with a wireless adapter in a peer- to-peer environment.

Channel: While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for each wireless adapter. The default channel setting depends on the installed region.

TX rate: This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the Network Camera will try to connect to the other wireless device with highest transmitting rate.

Security: Select the data encrypt method. There are four types including none, WEP, WPA-PSK, and WPA2-PSK.

1.None: No data encryption.

40 - User's Manual

Image 40
Contents IP Surveillance Table of Contents Package contents Read before usePhysical description Rear panelDI/DO Diagram Hardware Reset Installation Hardware installationSetup the Network Camera over the Internet Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation Network CameraAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Configuration area Page Video control buttons Drop-down list of preset positions Client Settings MP4 Saving Options Configuration System SystemSystem Time DI and doRoot Password SecurityManage User Manage PrivilegeEnable Https Create and Install Certificate MethodHttps Create self-signed certificate manually Page Page Network Network TypePPPoE Point-to-point over Ethernet Page LAN Http//192.168.4.160 or Http//192.168.4.1608080 Https Two way audioFTP Rtsp Streaming Page Wireless LAN PZ7112/PZ7122 only Page Page Ddns Dynamic domain name service DdnsCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Video Settings Audio and videoImage Settings Advanced mode CCD Adjustment Advanced mode Video quality settings for stream 1 / stream 2 Advanced mode Ntsc Audio settings Follow the steps below to enable motion detection Motion detectionPercentage = 30% Camera control Preset PositionZoom times display Patrol Settings ZoomReturn to home position while idle Dwelling time secPreview Homepage layoutLogo graph Theme options Page Event Settings ApplicationTrigger Event Schedule Page Page Server Settings Server TypePage Page Media Settings Media TypeFor example Recording Settings RecordingRecording Settings Recorded files on Network Storage Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upgrade Firmware Export / Upload Files Page URL Commands of the Network Camera AppendixGeneral CGI URL syntax and parameters Security levelGet server parameter values Method GET/POSTParameter pair Groupname Set server parameter valuesReturn Available parameters on the server Valid Values Description480 ~ Page New Delhi When cooperating with others, MODEL-BRAND-VERSION Group dii0~ndi-1Group doi0~ndo-1 Group securityName Value Group wireless HEX, Ascii Group ipfilterAllowi0~9end 0.0 ~ Qcif 16000 = 16 Kbps DHS Group upnppresentationGroup upnpportforwarding Group capability 1support Jpeg Group eventi0~2 Parameter Value Security DescriptionOne bit represents one digital input. The LSB Group serveri0~4 Group mediai0~4mediafreespace is used internally Name Value Security Description Drive the digital output DonumQuery status of the digital input Http//myserver/cgi-bin/dido/getdi.cgi?di1Query status of the digital output Capture single snapshotResolution Account managementChannel QualitySystem logs Upgrade firmwarePost data Camera Control Recall Preset Locations System InformationIP filtering Method AddallowGet SDP of Streamings Open the network streamingsTechnical Specifications Pan/Tilt/ZoomTechnology License Notice Electromagnetic Compatibility EMC
Related manuals
Manual 126 pages 46.97 Kb