Veo Infra-Red manual System ID, Camera Name, Default frame rate, Remote camera control, Log

Page 23

Network Camera User’s Guide

System: Define Frame Rate and Turn on/off “Remote camera control”

System ID:

It’s a unique number for each Network Camera for identification.

Camera Name:

You can enter the name of this unit here. It’s very useful to identify the specific device from multiple units. Note that use “_” or “-“ to replace “space” character to separate the name string. For example, “IR_IP” or “IR-IP” will be ok and “IR IP” will not work here.

Default frame rate:

You can set up frame rate here or via right-side control panel.

For example, set the frame rate to 5 FPS, then the image will be updated for 5 frames per second, the time interval can be checked by the time displayed on the image.

Remote camera control:

Turn on “Remote camera control”: users will be able to use right-side control panel vice versa.

Log:

User can check the log information of the Network Camera, including the Main Info, Appended Info, Operator IP, Operator MAC, and Time.

23/83

Image 23

Contents Infra-Red Network Camera PT IP Cam / IR IP Cam / Video Server Series Declaration of Conformity Table of Contents Appendix a Troubleshooting & Frequently Asked Questions Introduction OverviewSurveillance Minimum System RequirementPackage Contents Rear Panel Connections Connections10/83 Hardware Installation Before Operation Logging in to HomepageInstall the Network Camera with an Adsl Router First time uses the Network Camera 15/83 16/83 17/83 Logging in as an ordinary User Operating the Network Camera Control Panel 21/83 Advanced Function Area Remote camera control Default frame rateSystem ID Camera NameSelect the View button to check the log file PTZ Type Image Quality Reset to DefaultCamera PT Image SizeDhcp IP Finder Http Port29/83 PPPoE 31/83 32/83 33/83 34/83 Function Notification Application Remote path PasswordFTP server name User nameDate/Time Image file nameSuffix NoneSmtp server name Subject Sender’s e-mail addressReceiver’s e-mail address 41/83 42/83 Change the time manually Synchronize the time with PC’s timeGet Time from a NTP server 45/83 Firmware upgrade 47/83 48/83 49/83 50/83 Trigger Capture RightMouseButton of ActiveX Control View View Menu55/83 URL Split Rotate Resolution Quality Image Recording…- Save as Jpeg61/83 62/83 Save as AVI Image Recording…- Save as AVI64/83 65/83 Save Current Picture As … Network Camera User’s Guide 67/83 Features Appendix a Troubleshooting Frequently Asked QuestionsAccess Network Camera LAN Video Quality of Network Camera Camera ControlMiscellaneous Appendix B Ping IP Address Appendix C Bandwidth Estimation Image Resolution Average range of Data SizesIR IP-30M IR IP-50M Appendix D SpecificationsDhcp Appendix E Time Zone Table Network Camera User’s Guide 78/83 Preface Appendix F Ddns ApplicationApplication Steps-DDNS & Domain Name Page Page Setup the Ddns and PPPoE