Vivotek PT3114, PT3124 manual 886-2-82455282 F

Page 38

must be manually set to the same channel for each wireless adapter. The default channel setting depends on the installed region.

“TX rate” This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the Network Camera will try to connect to the other wireless device with highest transmitting rate.

“Preamble”, either “Long preamble” or “Short preamble” defines the length of the CRC block (Cyclic Redundancy Check is a common technique for detecting data transmission errors) for communication between the Access Point and the roaming wireless device. Long Preamble is the default setting. Note: High network traffic areas should use the shorter preamble type.

“Data encryption” Checking the box to enable the data encryption. By default it is disabled.

“Auth. Mode” Choosing one of the following modes, (Open is the default setting)

z“Auto” – The selection will apply Shared mode authentication method. This is the most strict mode.

z“Shared” – allows communication only with other devices with identical WEP settings.

z“Open” – communicates the key across the network.

“Key length” The administrator can select the key length among 64 or 128 bits. 64bits is the default setting.

“Key format” Hexadecimal or ASCII. “HEX” is the default setting.

z“HEX” digits consist of the numbers 0~9 and the letters A-F.

z“ASCII” is a code for representing English letters as numbers from 0-127 except “, <, > and space characters that are reserved.

“Network Key” Entering a key in either hexadecimal or ASCII format. When selecting different key length, acceptable input length is listed as following:

64 bits key length: 10 Hex digits or 5 characters.

128 bites key length: 26 Hex digits or 13 characters.

Note: When 22(“), 3C(<) or 3E(>) are input in network key, the key format can’t be changed to ASCII format.

- 31 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP 886-2-82455282 F Package Contents Hardware Installation To install in EthernetTo install in wireless LAN Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use AuthenticationInstalling Plug-in Primary User’s Capabilities Main Screen with Camera ViewZoom ConfigurationCamera view Pan/tilt control buttons PanClient Settings Url http//Network Camera/protocol.html For Best Real-time Video Images Administrator’s CapabilitiesFine-tuning for Best Performance Viewing Double size image Somewhere Between Real-time and Clear ImagesOnly Quality Images Will Do Protect Network Camera by passwords Opening Accounts for New UsersBuilding a Multimedia Web Attraction Site Demo on Multiple Sites Mid-Scale ServiceProduct Demo for e-Business Large-Scale Service More flexible options for viewers886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Building a Security Application Send Snapshots When Motion is Detected 886-2-82455282 F Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration Network Settings GeneralWlan Configuration Streaming886-2-82455282 F Mail & FTP Smtp886-2-82455282 F Ddns and UPnP Settings Video Parameters Audio/Video Codec ParametersAudio Parameters 886-2-82455282 F Camera Control Camera Control AreaPreset Function Area Motion Detection Event Operation Application SetupWeekly Schedule Sequential Operation Remote Controller Viewing System Parameters Factory DefaultViewing System Log Troubleshooting AppendixFrequently Asked Questions 886-2-82455282 F 886-2-82455282 F Restore Factory Default Settings URL Commands of the Network CameraCapture Update Snapshot of Jpeg Image Query Status of the Digital InputRestart System URL System Resource URLGeneral Format of Command URL System Configuration URLSecurity Configuration URL Network Configuration URLWlan Ssid Ddns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Camera Control URL Normal imageImage Quality Configuration URL Application Configuration URLSeconds delay to capture post-event Tilt Pan/Tilt DataPan 886-2-82455282 886-2-82455532 Technical Specifications SystemElectromagnetic Compatibility EMC Liability

PT3114, PT3124 specifications

Vivotek PT3124 and PT3114 are two advanced IP camera models designed for surveillance applications, offering cutting-edge technology to enhance security. Both models deliver high-quality video streams combined with a range of robust features that make them suitable for various environments, from offices and retail spaces to public areas.

The Vivotek PT3124 is equipped with a 2-Megapixel CMOS sensor, providing crystal-clear video resolution up to 1920x1080. It features a powerful motorized zoom lens, allowing users to zoom in on distant subjects without losing detail. The camera also boasts pan and tilt capabilities, offering a full 360-degree horizontal rotation and a vertical tilt of up to 90 degrees. This makes it an ideal choice for monitoring large areas with just a single camera.

In contrast, the Vivotek PT3114, while offering similar build quality and design, focuses on delivering essential surveillance features with a slightly reduced performance. It still provides a high-definition video output but is geared more towards users who need reliable monitoring without the advanced zoom functionalities.

Both models incorporate Vivotek's WDR Pro (Wide Dynamic Range) technology, ensuring high-quality video in challenging lighting conditions. This is particularly useful for environments that experience significant variations in light, allowing users to capture clear images even against backlighting.

Additionally, both the PT3124 and PT3114 are designed with Smart IR technology, which enhances night vision capabilities. This allows for effective monitoring in complete darkness, ensuring that the cameras can capture clear images up to a range of 30 meters in low-light conditions.

In terms of connectivity, both models support Power over Ethernet (PoE), simplifying installation by allowing the camera to receive power and data through a single cable. They also support various video compression formats like H.265 and H.264, which helps to optimize bandwidth usage without compromising video quality.

The user-friendly web interface and mobile app support make it easy for users to monitor their surveillance feeds from anywhere at any time. With features such as motion detection and alerts, Vivotek PT3124 and PT3114 provide reliable and proactive security management.

In summary, Vivotek PT3124 and PT3114 combine advanced surveillance technology with user-friendly features, making them excellent choices for both commercial and residential security needs. Whether users require advanced functionalities or general monitoring, these models cater to diverse surveillance requirements effectively.
Top Page Image Contents