Vivotek IZ7151 user manual Get SDP of Streamings, Open the network streamings

Page 97

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Parameter

Value

Description

 

 

Add a set of allow IP address range to server. Start

 

addallow

and end parameters must be specified. If the index

 

parameter is specified, it will try to add starting from

 

 

 

 

index position.

 

 

Add a set of deny IP address range to server. Start

 

adddeny

and end parameters must be specified. If the index

 

parameter is specified, it will try to add starting from

 

 

 

 

index position.

 

 

Remove a set of allow IP address range from server.

method

 

If start and end parameters are specified, it will try to

deleteallow

remove the matched IP address. If index is specified, it

 

 

will try to remove the address from given index position.

 

 

 

 

[start, end] parameters have higher priority then the

 

 

[index] parameter.

 

 

Remove a set of deny IP address range from server.

 

 

If start and end parameters are specified, it will try to

 

deletedeny

remove the matched IP address. If index is specified, it

 

will try to remove the address from given index position.

 

 

 

 

[start, end] parameters have higher priority then the

 

 

[index] parameter.

start

<ip address>

The name of user to add, delete or edit

end

<ip address>

The password of new user to add or that of old user to

modify. The default value is an empty string.

 

 

index

<value>

The privilege of user to add or to modify.

 

 

Redirect to the page <return page> after the parameter

return

<return page>

is assigned. The <return page> can be a full URL path or

relative path according the current path. If you omit this

 

 

 

 

parameter, it will redirect to an empty page.

Get SDP of Streamings

Note: This request requires viewer access privilege

Method: GET/POST

Syntax:

http://<servername>/<network_rtsp_s<0~m-1>_accessname>

“m” is the stream number.

“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the “subgroup of network: rtsp” for setting the accessname of SDP.

You can get the SDP by HTTP GET method.

Open the network streamings

Note: This request requires viewer access privilege

Syntax:

For http push server (mjpeg):

http://<servername>/<network_http_s<0~m-1>_accessname>

For rtsp (mp4), user needs to input the url below for a rtsp compatible player.

User's Manual - 97

Page 96 Page 98
Image 97
Page 96 Page 98
Contents Page Table of Contents Read before use Package contentsFront View Physical descriptionRear View General I/O Terminal BlockStatus LED DI/DO DiagramColor of LED indicates the status of the Network Camera Hardware Reset Hardware installation InstallationNetwork deployment Setup the Network Camera over the InternetInternet connection with static IP Power over Ethernet PoE Software installation Using web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP mobile phonesUsing Vivotek recording software Menu Vivotek LogoLive video window Vivotek Click this logo to visit Vivotek websiteLive Video Window Host NameMPEG-4 protocol and media options Video title Time Title and timeGate 101150 2008/01/09 Page MPEG-4 Media Options Stream OptionsMPEG-4 Protocol Options CLIP200801008-180853 MP4 Saving OptionsSystem SystemSystem Time DI and do Security Root PasswordAdd User Manage UserPage Network Type NetworkPPPoE Page Http Page Two way audio Rtsp Streaming FTPPage Page Ddns Ddns Dynamic domain name servicePage Dyn-interfree.it visit http//dyn-interfree.it Allowed list / Denied list Access listDelete allowed list / Delete denied list Audio and video Video settingsImage Settings Privacy Mask CCD SettingsExposure Page Page Audio Settings Mic Ext. Int Motion detection A privacy mask window, motion detection will not take effect Page Camera control RS-485 SettingsPreset Position Custom Command Page Application Media SettingsSNAPSHOTS20080104100341 Server Settings Page URL Event Settings Page Page Recording Recording SettingsPage Current Log System logView parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page Overview URL Commands of the Network CameraStyle convention General CGI URL syntax and parametersSecurity level Example Setting digital output #1 to activeGet server parameter values SyntaxSet server parameter values Valid values Available parameters on the serverGroup system Timezoneindex 480~520 Group doi0~ndo-1 Group dii0~ndi-1Group security Subgroup of network ftp Group networkSubgroup of network http Subgroup of network rtspSubgroup of rtsps0~n-1 multicast, n is stream count Subgroup of network sipPage Indicate exposure time when choosing shutter priority Indicate gain of input Group audioinc0~ n-1 for n channel products Group ircutcontrolGain of input Group motionc0~n-1 for n channel product Group imagec0~n-1 for n channel productsGroup ddns Group upnppresentationGroup syslog Group upnpportforwardingGroup camctrlc0~n-1 for n channel product Groupuarti0~n-1 n is uart port count Group uartOdd EvenGroup capability Mode Group eventi0~2 Group mediai0~4 Group serveri0~4Group recordi0~1 Drive the digital outputMethod GET/POST Query status of the digital output Query status of the digital inputAccount management Capture single snapshotServer will return the up-to-date system log Return System logsMethod Post Syntax Post dataIP filtering Open the network streamings Get SDP of StreamingsSyntax For http push server mjpeg Recall Camera ControlMethod GET Syntax Preset Locations Technical Specifications Installation, Management, Maintenance PowerApprovals Operating EnvironmentsTelefonakiebolaget Ericsson AB US PAT 6275798 6029125 Technology License NoticeElectromagnetic Compatibility EMC
Related manuals
Manual 110 pages 24.59 Kb

IZ7151 specifications

The Vivotek IZ7151 is a highly advanced surveillance camera designed for versatile outdoor use while delivering exceptional image quality and performance. This network camera stands out in the market due to its array of innovative features and cutting-edge technologies, making it an ideal choice for businesses and security professionals.

One of the main highlights of the IZ7151 is its 2MP sensor, which provides high-definition video resolution. It supports 1920x1080p at 30 frames per second, ensuring that viewers receive crystal-clear images with sharp details. The camera is equipped with a motorized varifocal lens that allows users to remotely adjust the focal length between 3.5mm and 10mm, which offers flexibility in surveillance coverage and ease of installation.

Additionally, the IZ7151 features a robust infrared (IR) illumination system that enables it to capture clear images in total darkness, with an IR range of up to 30 meters. This nocturnal capability is enhanced by the camera's Smart IR technology, which adjusts the intensity of the IR LEDs according to the scene's brightness, preventing overexposure and ensuring optimal image quality during low-light conditions.

Vivotek’s IR-cut filter allows the IZ7151 to provide true color video during the day and enhanced image processing at night. The camera also integrates advanced video compression technologies such as H.265 and H.264, which significantly reduce bandwidth usage and storage space without compromising image quality. This ensures smooth streaming and efficient data management, crucial for modern surveillance systems.

Another standout feature is the camera’s weatherproof design, adhering to IP66 standards, allowing it to withstand harsh weather conditions. The camera is also constructed to endure temperature extremes, functioning effectively in environments ranging from -30°C to 50°C.

The IZ7151 supports WDR Pro (Wide Dynamic Range), which significantly improves the camera's ability to capture details in high-contrast lighting conditions. This makes it suitable for various scenarios, such as entrances with overpowering sunlight and shadowy areas.

With features such as two-way audio, PoE (Power over Ethernet) support, and compatibility with Vivotek’s VAST software for video management, the IZ7151 is a comprehensive solution for surveillance needs. These attributes, combined with its reliability and advanced technologies, make the Vivotek IZ7151 an excellent investment for security applications across multiple settings.
Top Page Image Contents