Vivotek PT3113, PT3123 manual Send Snapshots When Motion is Detected

4.Check the “Event operation”. The triggering condition can be set to detected motion or status of the attached device,

5.Set the delay before detecting next event to avoid continuous false alarms following the original event,

6.Set the delay to take snapshots after event to capture the direction of the moving objects,

Send Snapshots When Motion is Detected

If no external sensor is available, the Administrator can use the built-in motion detection to monitor any movement and sends snapshots via email for security check.

Enable

7.Click on “Motion detection” in the left column,

8.Check “Enable motion detection”,

9.Click on “New” to have a new window to monitor video,

10.Type in a name to identify the new window,

-27 -

www.vivotek.com

T:886-2-82455282

F:886-2-82455532