Vivotek IP3111/3121 manual URL commands of Network Camera, Capture update Snapshot of Jpeg image

URL commands of Network Camera

For some customers who already have their own web site or web control application, Network Camera can be easily integrated through convenient URLs. This section lists the commands in URL format corresponding to the basic functions of Network Camera. Some RFC standards related to HTML may be a good reference for implementation of the customized homepages.

Capture update Snapshot of JPEG image

/cgi-bin/video.jpg

Move motorized device in PT direction

<direction>:	up, left, right, down, home
<command>:	1, 2, 3, 4, 5

/cgi-bin/camctrl.cgi?move=<direction>&cust=<command>

Query status of digital inputs

/setup/getdi.cgi

Network Camera will return status of digital input.

Drive digital outputs

/setup/setdo.cgi?do=<state>

,where state is H, L. H means NC connected with COMMON and L means NO connected with

COMMON.

For example, http://192.168.0.201/setup/setdo.cgi?do=h will command Network Camera, with IP address of 192.168.0.201, to set digital output to connect to NC with COMMON.

Clear data mode serial port driver

This URL applies to the attached serial port device including supported PTZ cameras or non-supported custom cameras. Note the serial port settings of custom cameras must be correctly defined in advance. Send command to device attached to COM /cgi-bin/senddata.cgi?data=123456,ABCDEF&flush=yes&wait=1000&read=6

74

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097