Advance Cam
Press “Freeze button” to freeze image. Press “Freeze button” again to copy image into memory. There is also an additional button on the wand that will allow you to change from “full” to “quad”. Press this button once and it will put you in “quad” mode. Press a second time and the camera will go back to a “full” screen mode. While in “quad” mode you must depress the capture button only four times to freeze all images if you press the button a fifth time the image will be copied into memory.
Freeze Button: Press button to freeze image on monitor.
Full / Quad Button: Choose to capture image in full
screen or capture 4 images
Transmitter:AIC900
(quad).
The transmitter has a power indicator that will
show low medium and high power. The
transmitter also has a channel selector that will select from channels 1 to 4. The power switch is located on the right side of the unit if looking from the front as shown
Power Indicator | Wireless Channel |
Shows green for | display |
high power and red |
|
for low power. |
|
| Plug this end into |
| the camera. |
DC Power input | Power Switch On |
used to charge the | and Off. |
battery | Channel Selector |