Canon CanoScan LiDe 50 manual Specifications, Weight

Specifications

		CanoScan LiDE 50
Scanner Type		Flatbed
Scanning Element		CIS (Contact Image Sensor)
Light Source		3-color (RGB) LED
Optical Resolution		1200 x 2400 dpi
Selectable Resolution		25 - 9600 dpi (ScanGear CS)
Scanning Bit Depth	Color	16 bit input / 16 bit or 8 bit output for each color (RGB)
	Grayscale	16 bit input / 8 bit output
Scanning Speed*1	Color	6.4 msec./line (600 dpi), 12.7 msec./line (1200 dpi)
(Photo or Document)	Grayscale, B&W	3.1 msec./line (600 dpi), 4.2 msec./line (1200 dpi)
Preview Speed*2		Approximately 9 sec.
Interface		USB 2.0 Hi-Speed,
		USB 2.0 Full Speed (USB 1.1 equivalent)
Maximum Document Size		A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
Scanner Buttons		4 buttons: COPY, SCAN, FILE, E-MAIL
Operating Range	Temperature	5°C to 35°C (41°F to 95°F)
	Humidity	10% to 90% RH (without condensation formation)
Power Requirements		Supplied via USB port
Power Consumption		In operation: 2.5 watts maximum, Stand-by: 1.5 watts
Maximum Exterior Dimensions		258 x 374 x 38 mm (10.1 x 14.7 x 1.5 in.)
Weight		Approximately 1.8 kg (4.0 lbs.)

*1 USB 2.0 Hi-Speed mode. Transfer time to computer is not included. *2 Calibration processing time is not included.

• Specifications are subject to change without notice.

• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows XP with these programs still installed. After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please read the “Troubleshooting” section of the Scanning Guide (HTML format manual).