Section 2
Getting Up and Running
Loading the Batteries
You must load 2 AA size alkaline batteries before the camera can be used:
1.Press down and hold the release button, and slide the battery/SD Card cover in the direction of the arrow to release the cover.
Release button
2.Insert the batteries according to the correct
polarity marks (+ or | Release Button |
3. Close the battery/SD card cover firmly. | Battery/SD |
| Card Cover |
-
+
SD Card AA Size Battery
Inserting and Removing an SD Card (Optional)
The camera comes with 16MB of
1.Open the battery/SD card cover.
2.Insert the memory card with the metal surface facing the front of the camera.
3.Press the card into the slot until it locks into position.
To remove an installed SD card, press the card inwards to release it. When the card pops out, gently slide it from its slot.
4