VIDEO Mode (For NTSC, lower resolution)
Layer 1 | Layer 2 | Layer 3 |
|
| Function | |
| Brightness |
| Brightness adjustment | |||
|
|
|
| |||
Display | Gamma | Photo/Text |
|
| Select Photo/Text Mode. | |
| Image | Normal/Gray |
|
| Select Normal/Gray Mode. | |
| Freeze | On/Off |
|
| Use Freeze to retain the image on | |
|
|
| the screen. | |||
|
|
|
|
| ||
| Exit |
|
|
| Exit this menu. | |
| Lamp | On/Off |
|
| Turn On/Off lamp | |
|
| Full Range On/off |
| Switch Full range on/off and night | ||
| Advance | Night view On /off |
| |||
|
| view on/off | ||||
|
| Exit |
|
| ||
|
|
|
|
| ||
| Language | English / | / | /Exit | Select a preferred language on the | |
Setting | menu. | |||||
|
|
|
| |||
| Factory | Enter / Exit |
|
| Reset all the values to the factory | |
| Reset |
|
| default. | ||
|
|
|
| |||
| Exit |
|
|
| Exit this menu. | |
Exit menu.
Camera as Switch
The DVI Adapter connects the DVI output to an input for a computer (VGA). When this input is used, the “SOURCE” button or menu command will switch the output between the “CAMERA IMAGE” and the “COMPUTER” image (VGA) on the DVI adapter.
When camera is “OFF” the computer VGA signal from the “DVI Port” adapter will pass through the camera to the “VGA Out” port. Thus the camera can be in a path to a projector and will let the signal pass through. If the camera is turned on the VGA pass through remains until the “Source” button is pressed. The camera image then becomes the output.
Note: The camera must be plugged in to have this pass through feature.
15