Digital Dream 3.2 manual Using the Flash, Setting the LCD Brightness

Using the Flash

Your camera has two flash settings:

ÖAuto-flash: the flash fires automatically according to lighting conditions. Use this mode for general photography

ÖFlash Off: the flash won’t fire under any circumstances. Use this mode when taking images in a place where flash photography is prohibited, or when the subject is distant (beyond the range of the flash).

Note

The flash cannot be used when battery power is low ().

Setting the LCD Brightness

Three brightness settings are available:

Ö Low LCD Brightness: Normally sufficient in dim lighting conditions

Ö Normal LCD Brightness: Use in intermediate lighting conditions. This is the default setting.

Ö High LCD Brightness: Use in bright conditions.

14