Emprex DSC 3380S manual See Deleting an, Image/Formatting, Flash memory or SD

		Check computer	Connect the camera to
			the PC with the USB
			cable and select [My
			Computer] – [Control
			Panel] – [System] –
			[Device Manager]. In
			the [Device Manager]
			window delete
			[Compose USB
			device] or [Unknown
			device] in [Other
			devices]. Then
			disconnect the camera
			and install the
			software before
			reconnecting the
			camera to the PC.
Camera	Electrostatic	Check if the camera is	Turn off the camera
malfunctions	discharge	connected to the PC	and then turn it back
during use	interfered with		on. If connected to
	the camera		the PC disconnect the
			camera from the USB
			cord, and turn it off
			then on again.
LCD	The LCD does	If you turn the power off	Press the LCD button
	not light.	with the LCD off, the	once to turn on the
		LCD screen is still set to	LCD.
		OFF the next time the
		power is turned on.
Everything on	Camera	Sync firmware with PC	If the “Camera
the LCD	firmware defect		firmware is out of
flashes and “7”			sync. Update
or “8” is			recommended.
displayed			Update firmware?”
			message appears when
			you connect the
			camera to your PC
			with the USB cable,
			click the [Yes] button
			to update your
			firmware.
LCD displays	Incompatible	Format SD card	See Deleting an
“E2” when a	file system on		image/Formatting
SD memory	SD memory		flash memory or SD
card is inserted	card		card in section 3

19