Edimax Technology IR-113E user manual You can click both ‘Vertical’ and ‘Horizontal’ box at

Here are the descriptions of every setup item:

Item	Description
Brightness /	Control the image parameters. Click ‘ - ' to decrease
Contrast /	value, or click ‘ + ‘ to increase value. You can also input
Saturation /	the value in the field directly.
Sharpness
Default	Set all above values to default value ‘128’.
Mirror	Check ‘Vertical’ or ‘Horizontal’ box to flip the image
	vertically or horizontally, this will help to correct the
	orientation of image when IP camera is hanged
	bottom-up by camera holder.
	You can click both ‘Vertical’ and ‘Horizontal’ box at the
	same time.
Power Line	Select the frequency of power line of the place you’re
Frequency	using this IP camera. This will help to reduce the flicker
	of certain lights in the image.
Condition	Select the condition that you’ll be using this IP camera
	from dropdown menu.
	- Auto: IP camera will adjust its parameters
	automatically.
	- Night: You’ll be using this IP camera in dark places
	where lights are insufficient.
TV Out	Click “Enable” box to enable its “VIDEO OUT” function
	for connections and video sending to TV monitors or
	DVRs.
Lens	(under “TV Out”)
	While connecting with an auto iris lens, and would like
	to have clear images from “VIDEO OUT”, please click
	“Auto iris” to enable this feature.
Day	IR-cut filter will only be switched on when there’s
	sunlight. You can define the starting and ending time
	when IR-cut filter should be switched on by select
	‘Schedule’ and define starting and ending time by
	dropdown menu.

When you finish with above settings, click ‘Apply’ button to save changes.

34