Edimax Technology IR-112E user manual Description

Item	Description
SMTP Server	Check this box to enable Email send.
	- SMTP Server: Input SMTP server’s IP address or hostname.
	- Port: Input SMTP server’s port number. In most cases it should
	be default value ‘25’.
	- Sender Email Address: Input the sender’s email address that
	will appear in the Email send by IP camera. This will help you to
	identify the Email sent by this IP camera, and may help when
	you have anti-spam software installed (you can set this Email
	address to ‘White List’ in your anti-spam software)
	- Receiver #1 Email Address: Input primary recipient’s Email
	address. This field is required.
	- Receiver #2 Email Address: Input backup recipient’s Email
	address. This field is optional.
	- Subject: Input Email titles that will appear in the Email send by
	IP camera. This will help you to identify the Email sent by this IP
	camera.
	- Authentication: Check this box when authentication is required
	by the Email server you’re using. You also need to input Email
	server’s username and password in corresponding field.
	- Requires SSL Encryption: If your Email server required SSL
	encryption, check this box. Please note that some Email server
	uses different port number than standard port 25 when SSL
	encryption is used.
	- STARTTLS: If your Email server required STARTTLS encryption,
	check this box. Please note that some Email server uses
	different port number than standard port 25 when STARTTLS
	encryption is used.
	- Test SMTP: Click this button to test SMTP server settings above
	immediately.

46