Polaroid Spectra 2 manual Repeated spots or Cause Solution Bar pattern

Page 23

Guide to better pictures 17

Repeated spots or	Cause	Solution
bar pattern

•Developer rollers inside the ﬁlm door need to be cleaned.

•Open ﬁlm door in indirect light (do not remove ﬁlm). While turning rollers, clean them with a lint-free cloth dampened with water.

Damaged picture

Cause

Solution

•Picture was shaken back and forth or bent shortly after it ejected from the camera.

•Picture was left in the exit slot, and camera was set down on a table or other surface.

•During ﬁrst 60 seconds of development, handle print gently; hold it only by its wide white border, and do not wave or bend it.

•Remove print from exit slot as soon as it ejects.

Image 23

Contents Page Page Use color in pictures p Keep background simple p Page Page Page Page Safeguards Contents Page Page Also be near a light-colored background You can take the most pleasing pictures of people, bothIndoorsYour subject should be within the 2 to 15 foot 0.6m To 4.6m ﬂash range. For best results, your subject shouldUsing the camera 6Features Features Programmed ﬂash 6m away Indoors Your subject should be 2 to 15 feet 0.6mTo 4.6m from the camera OutdoorsYour subject should be at least 2 feetNormal position Guide to better pictures Eyeglass tissues Guide to better pictures Keep the sales slip or other proof of the purchase date Blurry picture Cause Repeated spots or Cause Solution Bar pattern Keep the picture con Tint Pictures taken at temperAtures below 55F 13C Can have a blue tintYou can take the most pleasing pictures of people Camera, ﬁlm speciﬁcations OPN7249A 11/94 English/Español