C. Crane D483, 024 S Trouble Shooting Guide, Service Information, Audio is distorted, No Audio

Page 9

Trouble Shooting Guide

Audio is distorted:

Try adjusting the Input Level Control on the side of the FM Transmitter 2 (see page 7, #3). If that doesnʼt help, try adjusting the volume of your audio source.

No Audio:

1) Verify that the power on the FM Transmitter 2, your audio source, and your receiver are on.

2) Try adjusting the Input Level Control on the side of the FM Transmitter 2. If that doesnʼt help, try adjusting the volume of your audio source.

3) Check your cable and make sure it is connected to the right audio source (see page 4).

4) Check your frequency and make sure you are tuned to the correct fre quency.

If none of the above options work, try the FM Transmitter 2 on another device.

Service Information

If your unit requires service, call C. Crane Company at 1-800-522-8863.

FM Transmitter 2

Page 9

Image 9
Contents FM Transmitter For your future reference Before UseTable of Contents Audio Sources IntroductionControl Identification Location of ControlsBattery Installation Connection to PowerTuning Auto Shut-Off Timer Tuning Antenna OrientationTips To Make It Work Better LocationService Information Trouble Shooting GuideAudio is distorted No AudioRead Before Operating Equipment Safety InstructionsSafety Instructions 40FrequencyHz 16,500ResponseHz Specifications