Warwick 3.3 / 5.2 owner manual Protective Circuits, Getting Started

Page 6

PROTECTIVE CIRCUITS

Your new Warwick amplifier is equipped with a series of circuits to prevent it from destruction in case of inadequate ope- rating conditions:

Power-up delay:

When the unit is switched on, the SPEAKER OUT sockets are activated with a slight delay to

 

protect the loudspeakers.

Short-circuit:

In the event of a short-circuit at the power amp outputs, this feature prevents the output stage

 

transistors from destruction by quickly reducing current.

Direct current (DC):

This circuit continuously monitors the power amp output for direct current and protects the loud

 

speakers from overload should a transistor burn out.

HF oscillation:

By switching the power amp off, this safety feature prevents from damages that could be caused

Excessive

by frequencies in excess of 20 kHz (feedback, etc.).

 

temperatures:

Should the temperature-regulated fan cooler prove to be insufficient in extreme conditions, this

 

circuit protects the output stage transistors from destruction by switching the device off.

Note:

Note: You can recognise that one of these circuits has been activated as a result of a fault, when

 

the MUTE LED glows continuously even though you have not selected the MUTE mode. In case

 

of a shortcircuit please check the speaker cable. The amplifier must then be switched off and on

 

again, to get back into playing mode after having removed the short-circuit. In any other situati

 

on the amplifier switches automaticallyback to playing mode as soon as it detects the fault has

 

disappeared (e.g. the amplifier has overheated and cooled down again).

ENGLSIH

GETTING STARTED

1.

Make sure that loudspeakers capable of sustaining the load of a bass signal are connected to the SPEAKER OUT

 

sockets (the speaker cables should meet a cross-section of at least 2 x 1.5 mm).

2.

Check that the mains supply has been plugged in and that all external (effects) units possibly used are correctly con-

 

nected and operational.

3.

Set the MASTER control to zero.

4.

Plug your bass guitar into the amplifier's INPUT with a shielded line-cable.

5.

Press the POWER switch to turn the device on.

6.

Switch MUTE off and the red LED will extinguish.

7.

Switch the COMPRESSOR off (the 2-coloured LED will extinguish).

8.

Turn all volume controls of your bass guitar on to their maximum.

9.

Adjust the GAIN control until the (loudly) played bass signal flashes the Clip LED.

10.

Set the MASTER control to the volume you wish to play at.

11.

Adjust the sound that you wish with the controls and switches described in the respective chapters FRONT PANEL

 

CONTROLS.

12.

If necessary readjust GAIN.

8

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Official Warwick AMP Owner Manual Page English Safety Hints EnglishDont undertake repairs yourself RecommendationsHints All stub cables All connections of these cablesProtective Circuits Getting StartedSwitch for turning the amplifier on and off Front Panel ControlsRear Panel Technical Data Profet 3.2 Ohms Cabinets Connect Speakers Profet 3.2Speaker Set-up Quantity Impendance Ohms Cabinet

3.3 / 5.2 specifications

Warwick 3.3 / 5.2 is a remarkable software solution that caters to a wide range of industries, offering a unique blend of features and technologies that enhance user experience and productivity. Designed for versatility, this software operates effectively in various sectors, including education, business, and project management, allowing organizations to streamline their operations and achieve better results.

One of the main features of Warwick 3.3 / 5.2 is its user-friendly interface. The intuitive layout makes it easy for users of all skill levels to navigate the software effortlessly. This accessibility encourages team collaboration, reducing the learning curve and enhancing overall efficiency. In addition, the software provides customizable dashboards that allow users to tailor their workspace to meet specific needs, ensuring they can focus on the tasks that matter most.

Another significant aspect of Warwick 3.3 / 5.2 is its advanced data analytics capabilities. Users can gain valuable insights from various data sources, empowering them to make informed decisions quickly. The software can process and visualize complex data sets, making it easier for teams to track progress, identify trends, and improve performance. Furthermore, the incorporation of machine learning algorithms enhances these analytics, enabling predictive insights that foster proactive decision-making.

Warwick also emphasizes collaboration, with integrated communication tools that facilitate teamwork, even when users are working remotely. Real-time messaging and video conferencing features ensure that team members can maintain open lines of communication, while project management tools help to keep everyone on the same page regarding deadlines, responsibilities, and tasks.

Security is a top priority for Warwick 3.3 / 5.2, which utilizes state-of-the-art encryption methods to protect sensitive data. The software adheres to industry standards for compliance, ensuring that organizations can operate within legal frameworks and maintain the integrity of their information.

Lastly, Warwick 3.3 / 5.2 is compatible with a variety of third-party applications and services, allowing for seamless integration with existing workflows. This flexibility ensures that businesses can leverage their current tools while enhancing their capabilities with the powerful features offered by Warwick.

In summary, Warwick 3.3 / 5.2 stands out for its user-friendly interface, robust data analytics, collaboration tools, strong security measures, and compatibility with other applications. These characteristics make it a top choice for organizations looking to optimize their operations and drive performance.
Top Page Image Contents