Using the IPS Software with the KODAK PROFESSIONAL LED II Printers
The Source Directory Preferences dialog box appears.
2.Type the Source Directory name or click Browse to select the Source Directory where the TIFF images will be placed.
3.Type the Log File name or click Browse to select the Log File where printer error information is to be stored. The log file applies to all devices for the application. To edit the log file information, go to “Editing Log File Information” on page 16.
4.Enter the number of copies to print of each image in the Source Directory. Valid numbers are from 1 through 9999. The default value is 1.
5.Select the Printer Resolution:
•The default value is 250 ppi; when you select 250 ppi, each image is printed pixel for pixel.
•When you select 125 ppi, the printer’s hardware pixel replication capability is enabled.
6.Select the Print Production:
•To print immediately, click the button next to Immediate.
•To print later, click the button next to Deferred.
7.Select the Roll to Roll Options:
•If each image is the end of an order, click the box next to Order Punch.
•If you want a punch .25 in. inside each image area to mark a gutter for host image information, click the box next to ID Punch.
December 2000 | 15 |